26" x 12" x 4" Intercooler

This is our largest bar and plate front mount intercooler with end tanks. It is the biggest, baddest intercooler ever made. We simply call it "The Monster".

With a 4" thick bar and plate core that is over 2 feet long, this intercooler can flow enough cfm to support 1000hp! This intercooler is most popular with large horsepower applications such as single turbo Supras, RX-7s, Skylines, and race-only Honda applications.

Measure:
- Bar and plate design
- End to end length with tanks: 33.5"
- Core Size: 26" long x 12" high x 4" thick
- Inlet/outlet diameters: 3"

Performance:
- Supports up to 1000 hp
- Leak tested at 30 psi

Application:
Designed for use in large flow requirement custom turbo setup. It is perfect for any big-boost application for all types of vehicles. Small street turbos need not apply!

[size=18]26" x 12" x 3" Intercooler

This is a full aluminum intercooler with end tanks. Popular for large boost applications for most turbocharged imports.

Measure:
- End to end length with endtanks: 33.5"
- Core Size: 26" long x 12" high x 3" thick
- Inlet/outlet diameters: 3"

Performance:
- Supports more than 650 hp
- Flows up to 900 cfm
- Leak tested at 30 psi

Application:
Designed for use in any custom or upgraded stock turbo setup. It is perfect for any big-boost application for Nissan, Toyota, or Mitsubishi.

22" X 9" X 3" Intercooler

This is a full aluminum bar and plate intercooler with polished cast end tanks. This intercooler is out most popular size for 1G/2G Mitsubishi Eclipses, as well as turbocharged Honda B18C/H22A platforms. Perfect for your DSM, Honda, Nissan or other custom turbo project.

Measure:
- Bar and plate design
- End to end length with endtanks: 31"
- Core Size: 22" long x 9" high x 3" thick
- Inlet/outlet diameters: 2.5"

Performance:
- Supports up to 550 hp.
- Flows up to 800 cfm.
- Leak tested at 30 psi.

Application:
Designed for use in any custom or upgraded stock turbo setup. It is perfect for any medium to big-boost application for Nissan, Toyota, Honda or Mitsubishi.

18" X 9" X 2" Intercooler

This is a full aluminum intercooler with polished cast end tanks.

Measure:
- Bar and plate design
- End to end length: 26 inches
- Core Size: 18" long x 9" high x 2" thick
- Inlet/outlet diameters: 2.5"

Performance:
- Supports more than 350 hp
- Flows up to 500 cfm
- Leak tested at 30 psi

Application:
Designed for use in any custom or upgraded stock turbo setup. It is perfect for any big-boost application for Honda.

18" X 6" X 2.5" Intercooler

This is a full aluminum intercooler with polished cast end tanks.

Measure:
- Bar and plate design
- End to end length with endtanks: 26"
- Core Size: 18" long x 6" high x 2.5" thick
- Inlet/outlet diameters: 2.5"

Performance:
Supports more than 275 hp
- Flows up to 350 cfm
- Leak tested at 30 psi
Application:
Designed for use in any custom or upgraded stock turbo setup. It is perfect for any big-boost application for Honda.

12" x 9" x 2" Intercooler

This is a full aluminum intercooler with polished cast end tanks.

Measure:
- Bar and plate design
- End to end length: 20 inches
- Core Size: 12" long x 9" high x 2" thick
- Inlet/outlet diameters: 2.5"

Performance:
- Supports more than 225 hp
- Flows up to 350 cfm
- Leak tested at 30 psi

Application:
Designed for use in any custom or upgraded stock turbo setup. It is perfect for any small-boost application for Nissan.

All intercoolers come backed with a lifetime guarantee!

Retail
26" x 12" x 4" Intercooler $899
26" x 12" x 3" Intercooler $599
22" X 9" X 3" Intercooler $499
18" X 9" X 2" Intercooler $449
18" X 6" X 2.5" Intercooler $399
12" x 9" x 2" Intercooler $299


Group buy price
26" x 12" x 4" Intercooler $499
26" x 12" x 3" Intercooler $349
22" X 9" X 3" Intercooler $299
18" X 9" X 2" Intercooler $249
18" X 6" X 2.5" Intercooler $229
12" x 9" x 2" Intercooler $199

shipping prices to follow in gp

unlike Maximumboost.net we are an actual company and if someone thinks we arnt i can email an copy of my licence



sponsorship available

oh ya, this thread is so gone soon.


http://www.cardomain.com/id/StylezTA

IBTL

97blkZ24 wrote:oh ya, this thread is so gone soon.

What's wrong with this thread? Its a GP interest thread, unless they start making a list, its perfectly legit.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

there kind of big for preety much any project we could put together. execept for the last 2. youl find that most of the guys on hear stay away from the monster style in substituite of a well performeing small one.

you might have a sale on the second to last one but JRC sells preety much the same IC for a bout 9 dollars less.

but if anyone wanted to do a great sleeper you could use the side mount with a quite bov.


"Kick azz is my boost hero!!! "

Is this the same Chinese crap that's being sold on eBay or does an actual quality-driven company produce these?

Probably the Chinese crap since you're not saying who makes them.




<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">

ya what kind of cores do you use?

I'd like to see some prices




I was a retard, and now I'm permanently banned.

Quote:


Group buy price
26" x 12" x 4" Intercooler $499
26" x 12" x 3" Intercooler $349
22" X 9" X 3" Intercooler $299
18" X 9" X 2" Intercooler $249
18" X 6" X 2.5" Intercooler $229
12" x 9" x 2" Intercooler $199

4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

wow... i'm an idiot lol. thanks shifted.




I was a retard, and now I'm permanently banned.

ya what brand are they?

this intercoolers are Yonaka Motorsports they are not cheap ebay crap would ebay crap come backed with a lifetime guarantee

i could also add in a g/p for Intercooler Cores



sponsorship available

Dan Morrison wrote:ya what kind of cores do you use?

the cores are Bar and plate




sponsorship available

Those are terrible prices for chinese intercoolers,especially for a group buy.

Robbie c wrote:Those are terrible prices for chinese intercoolers,especially for a group buy.

they are NOT chinese intercoolers




sponsorship available

How does this "lifetime guarantee" work?

Shooting the man down already? Wow! Are those prices listed the regular price? If so, what would our GP price be?

Thanks and welcome to the infamous Jbody.org.




"Sig under construction"

Welcome to being a salesman on Jbody.org is what I meant to say.





"Sig under construction"

Spotabee Racing (The Fake Z24) wrote:wow... i'm an idiot lol. thanks shifted.

hahaha not really SpoRtabee...... I'm the idiot.....

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...

Robbie c wrote:How does this "lifetime guarantee" work?

Quality...above all else.
Every Yonaka Motorsports brand product is covered by a limited warranty against defects in workmanship and materials for the lifetime of the original owner.

Should a problem occur due to defect, Yonaka Motorsports will, at the company's discretion, either repair or replace the product at no charge. Damage to the product resulting from an accident, neglect, or normal wear and
tear will, at our discretion, be repaired or replaced for a modest fee.

Original Proof of purchase is required for all warranty claims. If a warranty claim is needed, purchaser should send product prepaid to Yonaka Motorsports.

Please note that all warranty claims must first be issued an RMA number (return merchandise authorization) BEFORE item is returned to Yonaka Motorsports. RMA numbers can be obtained by calling toll-free at 1-800-824-4852.

Please remember we do not accept shipments sent "collect". Products returned to us with freight charges owing or without a valid RMA number will be refused and returned to sender.

very interested with this GP if it goes through, especially since you're based in Canada
Those are great prices.

Robbie c, STFU. you're shooting down someone who is trying to give us great prices on intercoolers. Guys like you are the reason vendors never stay long in the j community but give up. We should welcome him not tell him that his intercoolers are junk without even knowing anything about them.



15.574 @ 89 mph stock

Product No: Product Name: MSRP (USD):
YMIC012 Monster Intercooler Type 12 26"x12"x4" $899.00
YMIC011 Intercooler Type 11 26x12x3" $599.00
YMIC010 Intercooler Type 10 22x9x3" $499.00
YMIC006 Intercooler Type 6 18x9x2" $449.00
YMIC009 Intercooler Type 9 18x6x2.5" $399.00
YMIC005 Intercooler Type 5 12x9x2" $299.00


Group buy price
26" x 12" x 4" Intercooler $499 save $400
26" x 12" x 3" Intercooler $349 save $250
22" X 9" X 3" Intercooler $299 save $200
18" X 9" X 2" Intercooler $249 save $200
18" X 6" X 2.5" Intercooler $229 save $170
12" x 9" x 2" Intercooler $199 save $100

I think that's right...







"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"

I bought new headlight bulbs from a company once. PlasmaIndustries.com... They had a LIFETIME GUARANTEE. They went out of business. No clue how long they had been in business. Probably not as long as Yonaka. Yonaka looks like a decent company. Lots of products offered. If Yonaka doesn't own up to the lifetime warranty policy (which is highly unlikely), you're stuck as the middleman. The bad guy. The one that customers complain to. That sucks!

Ty has lowered the prices at JohnnyRaceCar.com. A 6" FMIC with a 25"x5.875"x2.75" core is only $185, shipped. Granted, his are "tube and fin" intercoolers, but they perform VERY well for our applications. Both fitment- and performance-wise. Alot of people on this site are using them, including myself.

I'm not telling anyone to cheap out on an intercooler or neglect getting one in the first place! But... JRC FMIC's have a dirt-cheap price tag, are already consistently proven as being reliable, and works perfect for our aftermarket turbo setups. Most people do research before buying a product, and user reviews will make or break a sale. Prospective buyers will think, "I've seen 20 turbo'd Cavaliers and Sunfires on J-body with those johnnyracecar intercoolers. They must work pretty good! I can save a ton of money. I'll get a johnnyracecar intercooler!". On top of your higher intercooler price, you also have a shipping charge.

Apart from the Yonaka FMIC's possibly performing as good as any other brand of intercooler, if the price isn't right, the group purchase just won't go. I realize you are offering the bar and plate design, but it's really all just a matter of personal preference.

Being in the wholesale/retail trade myself, if you can't offer a low enough price, give up and try to sell something else. The problems here are: In order to get a lower price to be competitive with JRC, you will need to sell more intercoolers initially. In order to sell more intercoolers, you will need more interested J-owners willing to go turbo. In order to have J-owners order intercoolers through your GP, they need to be a serious buyer instead just "putting their name on the list". In most GP's, 60% of the buyers are serious. The other 40% thought it was a good price and wanted to 'get in' in case the product actually sold dirt cheap! Then either 1) The GP dies or 2) The seller sells to the remaining serious buyers and might possibly be taking a loss on profit because they can't buy from the manufacturer as cheap as they thought they could. Look in the Group Purchase Forum. I bet you'll find at least 10 on the first page that didn't work. Why? Not enough buyers or they found it cheaper elsewhere.

Read this carefully: I'm only trying to save you the trouble. And as a business, you should already know that time is money. I'd LOVE to see more companies offer aftermarket parts for our cars. It's just so damn hard. When you start up a company, you gotta start up big. Selling one thing at a time now won't build a strong reputation for the future. Look at Frank with Maximum Boost. I'm just trying to help you out.

Last but not least:
If you see enough interest in these things and you start the GP, I hope they sell like hotcakes! Good luck man.

Quote:

DanteMustDie :

Robbie c, STFU. you're shooting down someone who is trying to give us great prices on intercoolers. Guys like you are the reason vendors never stay long in the j community but give up. We should welcome him not tell him that his intercoolers are junk without even knowing anything about them.

I don't think I said anything about them being junk,

Quote:

Robbie c:
Those are terrible prices for chinese intercoolers,especially for a group buy.

Just as I thought ,nothing said about junk.

DanteMustDie you need to calm down.

i may actually be interested in this... just in time for x-mas!
By the Way what's the best way to contact you? Through the the streetline site or through the e-mail on your registry, i have a some questions for you.



http://www.cardomain.com/id/oyyci
http://photobucket.com/albums/d170/Oyyci/