SAFC-2 Sensor Number - Boost Forum - j-body.org

SAFC-2 Sensor Number - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.

SAFC-2 Sensor Number

Tuesday, November 08, 2005 12:54 PM

Speedster

How was the sensor numbers 5 in and 5 out determined to be the correct setting for the pressure sensor on the SAFC-2?

Power Curve

Re: SAFC-2 Sensor Number

Tuesday, November 08, 2005 1:34 PM

Shifted

5in - 5out =

5 volt reference signal IN to the SAFC
5 volt reference OUT to the ECU.

The GM map sensor is a 5 volt signal. The ECU expects to see a 0v-5v signal, hence 5 volts in, 5 volts out (5in-5out).

4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: SAFC-2 Sensor Number

Tuesday, November 08, 2005 1:35 PM

newman

because the sensor takes 5 volts in and uses
5 volts max out

Re: SAFC-2 Sensor Number

Tuesday, November 08, 2005 2:07 PM

Speedster

ok, that adds up

Power Curve

Forum Post / Reply
You must log in before you can post or reply to messages.

Start New Topic Advanced Search