Quick 2200 + Boost Q - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Quick 2200 + Boost Q
Monday, October 31, 2005 1:03 PM
The setup from J-Tuners come at 5PSI.

has anyone ever heard of a problem with stock internals at 5PSI. I am building the engine but I am going to have the turbo and IC on before the internals are in.

Any thoughts?

Re: Quick 2200 + Boost Q
Monday, October 31, 2005 1:04 PM
check my registry.... 10.5 psi holding fine for 6 months now.....

STOCK INTERNALS ran a 222.3 WHP.......

Lee



JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Quick 2200 + Boost Q
Tuesday, November 01, 2005 6:27 PM
should last a while.
just keep it from detonating.



Re: Quick 2200 + Boost Q
Tuesday, November 01, 2005 8:23 PM
Robbie c wrote:should last a while.
just keep it from detonating.

*last forever (well, as long as without boost at least)
But, he's definately right on the detonation (check my reg for a pic of what it will do to you...



fortune cookie say:
better a delay than a disaster.
Re: Quick 2200 + Boost Q
Tuesday, November 01, 2005 9:09 PM
ya a good tune is a MUST............. without that .... bye bye motor.....

get a knock sensor if your worried..or just safc2.........

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Quick 2200 + Boost Q
Wednesday, November 02, 2005 11:03 AM
10+psi is attainable with tuning


saturn 5speed turbo 8psi
93' z24 grand prix turbo 3.1 swap, crane 272 cam, 3100 hybrid top end swap, t04b turbo
Re: Quick 2200 + Boost Q
Wednesday, November 02, 2005 11:19 AM
Lee wrote:ya a good tune is a MUST............. without that .... bye bye motor.....

get a knock sensor if your worried..or just safc2.........

Lee


good tune ? u mean fuel mods ?

isnt 5psi safe to use with stock fuel system including injectors ?
Re: Quick 2200 + Boost Q
Wednesday, November 02, 2005 4:05 PM
GUYS all I have are fuel injectors, FMU.... I'm holding 11 psi on stock internals... the day before I put my car away this year (so last week sometime) it hit 11 psi healthy........

no knock,

oh and when I said only fuel injectors and FMU.... thats all I have....and the RSM supercharger reflash for my turbo kit....
just waiting for safc2 to come then the reflash is going peace......it kinda sucks.... I don't want to get into why but don't go with the reflash with the 2200 motor....

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search