Turbo and Reflash! - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Turbo and Reflash!
Tuesday, October 18, 2005 6:05 PM
Ok guys my car is halfway through its turboing stage. Now I have about had it with the tuner shop I have been going to and do not want to do anything else through them. So my question is would it be safe to run my t3/t4 turbocharger at 7psi with only the gm 310cc injectors, and the gm reflash and 2 bar map sensor? The guy at the shop told me to get a fmu and a inline fuel pump and to not run the reflash. But I was searching on the org and it seems that its pretty successful with turbo setups. So do you guys think the reflash and 2 bar map sensor with my setup would call for no problems? Any info is greatly appreciated. Thanks in advance! Also if it helps its an intercooled setup but still a stock motor.

~Boost. Its what's for dinner!~


Re: Turbo and Reflash!
Tuesday, October 18, 2005 7:25 PM
dragracemyz24 is running the reflash and i know his a/f is pretty damn good.


13 psi and climbing......

Re: Turbo and Reflash!
Tuesday, October 18, 2005 7:27 PM
i ran 13psi on the s/c program with ford red tops, 30lb injectors, i would say your fine @ 7psi, that shop your dealing with doesnt know what the reflash consists of, you wont need a fmu, but a adj fpr on the rail would be useful, and at 7psi your stock pump will be fine



R.I.P. Brian Klocke, you will never be forgotten
Re: Turbo and Reflash!
Tuesday, October 18, 2005 7:40 PM
Get an FMU, SAFC and injectors.... you'll be fine.....
For get a reflash....

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Turbo and Reflash!
Tuesday, October 18, 2005 9:11 PM
Lee wrote:Get an FMU, SAFC and injectors.... you'll be fine.....
For get a reflash....

Lee


why would he? the reflash takes all the guess work out of tunning it, reflash with 310 injectors and a 2 bar map and it will be basicaly a factory turbo car, so much easier, and a ton of people have used it sucesfully and proved it works great.
the only way to go if you have a 2000+ 2.4 IMO



Re: Turbo and Reflash!
Tuesday, October 18, 2005 9:15 PM
Sorry my mistake..... it says Gm reflash.... ya Thats good stuff...... Get the reflash.

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Turbo and Reflash!
Tuesday, October 18, 2005 9:18 PM
Lee wrote:Get an FMU, SAFC and injectors.... you'll be fine.....
For get a reflash....

Lee


Stop answering peoples questions when you have no clue what you are talking about.


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Re: Turbo and Reflash!
Tuesday, October 18, 2005 10:07 PM
Alright then I guess then I will stick with my original setup and once they get my wastegate in and welded on I will probably never be in there again. LOL the only thing good out of my deal with them was a free external wastegate. Thanks again everybody and I will hopefully have pics up by the weekend.

~Boost. Its what's for dinner!~

Re: Turbo and Reflash!
Wednesday, October 19, 2005 8:21 AM
skilz your an IDIOT..... LOOK UP MORON


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Turbo and Reflash!
Wednesday, October 19, 2005 8:22 AM
Lee wrote:Sorry my mistake..... it says Gm reflash.... ya Thats good stuff...... Get the reflash.

Lee


I'm singing the "SKILZ is an IDIOT" song right now !!!


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Turbo and Reflash!
Wednesday, October 19, 2005 10:31 AM
listen here lee, if you look at posted times your post is 3min apart and i guarantee your post was posted while skilz was making his post so who is the ass now



R.I.P. Brian Klocke, you will never be forgotten

Re: Turbo and Reflash!
Wednesday, October 19, 2005 11:45 AM
Quote:

Quote:

Lee wrote:

Get an FMU, SAFC and injectors.... you'll be fine.....
For get a reflash....

Lee
Stop answering peoples questions when you have no clue what you are talking about.


Thank you Skilz......

I have seen a few other posts that made no sense myself. And that still would not work, he would need at least an MSD too for the timing, otherwise.......tick tick BOOM.

I don't know about 2.2's cause frankly I don't care, but the 2.2 and 2.4 are going to be different setups due to displacement.(different post)

Later,
Jason



USACi =>146.9db
14.88 @ 90.73MPH =>GM Charger, Motor Mounts, Catback exhaust
Re: Turbo and Reflash!
Wednesday, October 19, 2005 12:18 PM
I love how you all talk @!#$....
then when someone else does you all freak out....

haha
well all I know is if you have a problem with me .... come on up to canada.... and talk to me about it.... I'm waiting.... I'm not a little kid... but if you got something you need to say to me I'm 20 years old...... lets deal with it ......I love it .... we drive cavaliers and that are turbo and you all think that you can come on here like mister know it alls........
whats your deal guys......

ne ways I'm not going to argue about @!#$ anymore..... just don't read my posts if they don't concern you ....

PEACE


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Turbo and Reflash!
Wednesday, October 19, 2005 2:03 PM
I stand by what i said....


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Re: Turbo and Reflash!
Wednesday, October 19, 2005 4:59 PM
Skilz10179 wrote:I stand by what i said....


follow follow follow ......

Let us know how it goes... I would love to see the set up ....

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search