anyone got dynos of the 2.7, 2.6, etc pullies? - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
anyone got dynos of the 2.7, 2.6, etc pullies?
Thursday, September 15, 2005 11:43 AM
Comparing the differences between the 2.5-2.8, in any increments?



-----------------------------------------------------------------------

-----------------------------------------------------------------------
- Sold my beloved J in April 2010 -

Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Thursday, September 15, 2005 12:12 PM
increments othat than size? lol




I was a retard, and now I'm permanently banned.
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Thursday, September 15, 2005 3:19 PM
i meant dyno #'s on 2.8, 7, 6, 5.....



-----------------------------------------------------------------------

-----------------------------------------------------------------------
- Sold my beloved J in April 2010 -
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Thursday, September 15, 2005 3:24 PM
I might do that when i go to dyno my car.. as i have the quick change pulleys from 2.8-2.5".. only thing will be is i will have alcohol injection so it might be a bit different..



The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Wednesday, October 26, 2005 8:24 PM
dyno it! lol



-----------------------------------------------------------------------

-----------------------------------------------------------------------
- Sold my beloved J in April 2010 -
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Wednesday, October 26, 2005 10:39 PM
ahah i got like 500km more on the break in... and have to figure out this stupid stalling problem i have and she is getting strapped to the dyno...



The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Friday, October 28, 2005 11:00 AM
break in?? lol woops.. didnt know there was one.....


-marc

gettin blown @ 6psi daily..
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Friday, October 28, 2005 12:44 PM
Josh F wrote:ahah i got like 500km more on the break in... and have to figure out this stupid stalling problem i have and she is getting strapped to the dyno...


joe schulte was kind enough to break my s/c in while on his car.. hehe

um what car with GM reflash dosent stall out? im getting it constantly now. light fly probably dosent help.





BeardLife / Club Awesome Reject Blog
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Friday, October 28, 2005 8:51 PM
^ i dont have the reflash, but the lightened flywheel. Turn up your idle screw a little bit.

mine dont stall out at all. once in a while the rpms dip down, but it catchs itself. (knock on wood).


dynos-

heat soak was a issue , i remeber calvin did a dyno a while back and gained like 2-3 hp with pulleys, But now a days people are running water/alky/methanol injection so i bet the results would be better.




Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Friday, October 28, 2005 10:15 PM
and have to figure out this stupid stalling problem

mine did this for a week when i got the reflash then it just stopped. Now it only does it after i fill up on gas, like the first couple stops i make then its gone again.





Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Saturday, October 29, 2005 1:13 PM
Qwik2k2z24 wrote:
Josh F wrote:ahah i got like 500km more on the break in... and have to figure out this stupid stalling problem i have and she is getting strapped to the dyno...


joe schulte was kind enough to break my s/c in while on his car.. hehe

um what car with GM reflash dosent stall out? im getting it constantly now. light fly probably dosent help.


No i ment break in on my new Clutc, fly wheel and lsd....

I do find now with my light flywheel my car stalls with out me even knowing.. i find out when i go to turn and i got no steering or brakes

Also where is this screw to turn up the idle?



The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno

Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Sunday, October 30, 2005 7:28 AM
mm.. mine only drops to really low rpm if i rev it up high in neutral. Sometimes is stalls, and sometimes it just catches it self.

Nate



Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft
Re: anyone got dynos of the 2.7, 2.6, etc pullies?
Sunday, October 30, 2005 8:59 AM
Josh- The idle screw is on the throttle body....ummm the engine side its kind of a pain in the ass to get to with our tb's turned sideways w/ the supercharger. It uses a star or allen key I believe.



Car is for Sale!Supercharger kit is for sale!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search