Got rid of the windshield washer fluid as it was bubbley and from some research i found out it was too inconsistant.
So i picked up 4 yellow bottle's of HEET and some distilled water and mixed the two. I got another empty milk jug and dumped one bottle of heet, to one bottle of distilled water till it was all filled up. Shook it up and put it in my tank in the trunk.
The car seems to like it better for sure.
I have to get some more intake temp #"s, but my scan tool i borrowed isnt working the best.
Thought i would share my info, as not too many people have water injection with the gm s/c.
word.......
..... come on down this next weekend (10/11) and help us move
.......... bring your car so you can take me for a ride
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
hmm i will have to see what is up then and get back to you.
Hey Jake, I also stopped using washer fluid. I've been running a water and methanol mix, the blower really likes this stuff!
Where do u get the heet stuff at? Auto parts store?
Jake- Would you say that your mixture is 50%Heet and 50%distilled? Or is there more heet than distilled water?
I'll be buying my kit very shortly so I'm just gettin my shiat straight before hand....lol...
Car is for Sale!Supercharger kit is for sale!
i bought mine at a little corner store down the road from me.
but autoparts store has it, walmart has it cheap.
it is about a 60/40 mix roughly. (more water then that heet stuff).
ya ,need any ?'s answered about the water injection set up let me know i will gladly help you out.
This the stuff Jake??
Car is for Sale!Supercharger kit is for sale!
got one for 99 cents lol
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
hmm i wonder how safe that is
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
... i tryed using just meth.... it evaped befor the blower... now im using 50\50 mix... the hole housing gets cold now...
i like it..
no knock retard also.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
1 of these years ill have to try it
i saw close to 10 psi on my s/c last night , gotta love cooler weather , normal is 5-7 psi
That makes me have a question.....Will cooler weather (Temps in this case) increase boost pressure from turbos? Since I've installed my cooling mist kit, my boost pressure has gone from around 10 to 13 lbs. Normal?
Can't see the pic above, is
this it?
<img src="http://img123.exs.cx/img123/8461/robsig.jpg">
Aaron5278 wrote:That makes me have a question.....Will cooler weather (Temps in this case) increase boost pressure from turbos? Since I've installed my cooling mist kit, my boost pressure has gone from around 10 to 13 lbs. Normal?
Outside temps should not affect boost pressure from a turbo.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
I am still am waiting for the throttle body plate to arrive (drilling my injector into it) but i am just wondering how much of a gain it gives you?? I have all the pulley sizes from the stock 2.8-2.5" so ill try them all but i just am dieing to put it in and curious to how well it works
The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno
This one?
<img src="http://img123.exs.cx/img123/8461/robsig.jpg">
no, the yellow bottled stuff meant to get the water outta your gas tank. It is 99% methonal.
Sweet, thanks!
<img src="http://img123.exs.cx/img123/8461/robsig.jpg">
Keep in mind, methonal is extremely corrosive.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
that is why everyone mix's it with distilled water.
