Hey guys im gonna put in a emanage in my car and I was wondering if there was a special one to buy for a cavalier or gm car. Somebody told me if I get the wrong one it can fry my ecu. What should I be looking for, or are all of them the same. Thanks

There all the same. Just make sure you tap the correct wires

Right on dude does anyone know what wires to tap for the ecotec Im pretty sure I saw a post on that once. Thanks

http://www.j-body.org/forums/search.php?f=40&search=emanage&globalsearch=0&match=1&date=0&threadtype=1&fldsubject=1

and

http://www.j-body.org/forums/search.php?f=40&search=emanage&globalsearch=0&match=1&date=arch&threadtype=1&fldsubject=1




"Only two things are infinite, the universe and human stupidity, and I'm not sure about
the former." - Albert Einstein

i have a file on the ecotec greddy wiring
if you would like it let me know.

i'd like it, aim and email in profile

wire mapping


<a href="http://www.cavyjason.com/"><img src="http://www.cavyjason.com/photos/night-banner.jpg" border=0></a>

EcoTec
Powertrain Control Module (PCM) Pin Layout




Connector Part Information • 15357150
• 56-Way F Micro-Pack 064 Series (BLU)
Pin Wire Color Circuit No. Function
1-3 -- -- Not Used
4 PPL 420 TCC Brake Switch/Cruise Control Release Signal
5-6 -- -- Not Used
7 BLK 2760 Low Reference
8-10 -- -- Not Used
11 BLK 2759 Low Reference
12-14 -- -- Not Used
15 PPL 1807 Class 2 Serial Data
16 PPL 1807 Class 2 Serial Data
17-18 -- -- Not Used
19 PNK 639 Ignition 1 Voltage
20 ORN 480 Battery Positive Voltage
21 TAN 472 IAT Sensor Signal
22 PPL 1589 Fuel Level Sensor Signal
23 GRY 2700 5 Volt Reference
24 -- -- Not Used
25 GRY 2709 5 Volt Reference
26-32 -- -- Not Used
33 BRN/WHT 419 MIL Control
34 DK GRN/WHT 817 Vehicle Speed Signal
35-36 -- -- Not Used
37 RED/BLK 380 A/C Refrigerant Pressure Sensor Signal
38 -- -- Not Used
39 DK GRN 890 Fuel Tank Pressure Sensor Signal
40-42 -- -- Not Used
43 DK GRN 335 Cooling Fan Relay Control
44 -- -- Not Used
45 WHT 1310 EVAP Canister Vent Solenoid Control
46 DK GRN/WHT 465 Fuel Pump Relay Control
47 DK GRN/WHT 459 A/C Compressor Clutch Relay Control
48 -- -- Not Used
49 DK GRN 83 Cruise Control Inhibit Signal
50 -- -- Not Used
51 BLK 2751 Low Reference
52-56 -- -- Not Used





Connector Part Information • 15357133
• 73-Way F Micro-Pack 064 Series (BLK)
Pin Wire Color Circuit No. Function
1 LT BLU/BLK 1748 IAC Coil A Low Control
2 LT BLU/WHT 1747 IAC Coil A High Control
3-4 -- -- Not Used
5 DK GRN/WHT 428 EVAP Canister Purge Solenoid Control
6 RED/BLK 1228 PC Solenoid Valve High Control -- Sol. A Automatic Transmission Only
7 LT BLU/WHT 1229 PC Solenoid Valve Low Control -- Sol. A -- Automatic Transmission Only
8-9 -- -- Not Used
10 LT GRN 1222 1-2 Shift Solenoid Valve Control -- Automatic Transmission Only
11 YEL/BLK 1223 2-3 Shift Solenoid Valve Control -- Automatic Transmission Only
12 BRN 418 TCC PWM Solenoid Valve Control -- Automatic Transmission Only
13 PPL/WHT 1668 HO2S High Signal Sensor 2
14 TAN/WHT 1669 HO2S Low Signal Sensor 2
15 TAN 1667 HO2S Low Signal Sensor 1
16 PPL 1666 HO2S High Signal Sensor 1
17 LT GRN/WHT 1749 IAC Coil B High Control
18 LT GRN/BLK 444 IAC Coil B Low Control
19 WHT 423 IC Timing Control A
20 ORN 406 IC Timing Control B
21-25 -- -- Not Used
26 BRN/WHT 633 Camshaft Position Signal
27 YEL 573 CKP Sensor 1 Signal
28 PPL 574 Low Reference
29 LT GRN 432 MAP Sensor Signal
30 -- -- Not Used
31 DK BLU 417 TP Sensor Signal
32-33 -- -- Not Used
34 WHT 776 Transmission Range Switch Signal P
35 GRY 773 Transmission Range Switch Signal C
36 YEL 772 Transmission Range Switch Signal B
37 BLK/WHT 771 Transmission Range Switch Signal A
38 -- -- Not Used
39 BLK 2761 Low Reference
40 BLK 2762 Low Reference
41 DK BLU/WHT 1231 AT ISS Low Signal -- Automatic Transmission Only
42 PPL 401 Signal Low-Front
43 -- -- Not Used
44 GRY 1716 Low Reference
45 ORN/BLK 469 Low Reference
46 -- -- Not Used
47 BLK 2752 Low Reference
48 -- -- Not Used
49 GRY 23 Generator Field Duty Cycle Signal
50 RED 225 Generator Turn On Signal
51 BLK 1744 Fuel Injector 1 Control
52 LT GRN/BLK 1745 Fuel Injector 2 Control
53 LT BLU/BLK 396 Cruise Control Engaged Signal
54 TAN/BLK 231 Oil Pressure Switch Signal
55 PNK 1224 Transmission Fluid Pressure Switch Signal A --Automatic Transmission Only
56 DK BLU 1225 Transmission Fluid Pressure Switch Signal B -- Automatic Transmission Only
57 RED 1226 Transmission Fluid Pressure Switch Signal C -- Automatic Transmission Only
58 YEL 657 TCC Release Switch Signal -- Automatic Transmission Only
59 YEL 410 ECT Sensor Signal
60 YEL/BLK 1227 TFT Sensor Signal -- Automatic Transmission Only
61 RED/BLK 1230 AT ISS High Signal -- Automatic Transmission Only
62 YEL 400 Signal-High Front
63 -- -- Not Used
64 DK BLU 496 Knock Sensor Signal
65 GRY 2704 5 Volt Reference
66 -- -- Not Used
67 GRY 2701 5 Volt Reference
68 -- -- Not Used
69 DK GRN 676 HO2S Heater Low Control Sensor 1
70 BLK/WHT 1423 HO2S Heater Low Control
71 LT BLU/BLK 844 Fuel Injector 4 Control
72 PNK/BLK 1746 Fuel Injector 3 Control
73 BLK/WHT 451 Ground

just wait for HP tuners to release the tuning software.


2006 Black Cobalt SS Supercharged G85
13.91@102.77

Newman I would also like that stuff on wiring the e manage.

what do you mean by tuning software??? can i get software that is already tuned for my car?

Jeff Marmus wrote:what do you mean by tuning software??? can i get software that is already tuned for my car?

HPtuners is working on a software package that would allow you to change your ecu mapping to make it work with whatever mods you have done, including boost. There's threads in the performance forum.


15.3 @ 89.97mph, 14's on the way?

For Sale:
Getrag '00-'02 2.4 8000kms $800

Ecotec PCM Connections
for Greddy E-manage
Emanage Wire(s)
Function Connector Pin Wire Color In Out
Ignition Positive Voltage C1 19 PNK Red
PCM Ground C2 73 BLK/WHT Black
MAP Sensor Signal C2 29 LT GRN White ** Green **
Fuel Injector #1 Driver C2 51 BLK Blue/Red
Fuel Injector #2 Driver C2 52 LT GRN/BLK Orange/Red
Fuel Injector #3 Driver C2 72 PNK/BLK Yellow/Red
Fuel Injector #4 Driver C2 71 LT BLU/BLK Purple/Red
Ignition Control Output 1-4 C2 19 WHT Blue/White *** Blue/Black***
Ignition Control Output 2-3 C2 20 ORN Orange/White*** Orange/Black***
Throttle Position Sensor C2 31 DK BLU Gray
RPM Signal* C2 19 WHT Brown

C1 Blue Connector
C2 Black Connector
Rotary SW1 3
Rotary SW2 4
Rotary SW3 2

Ignition Input Pull Down
Ignition Output 5V

* - Your emanage will see exactly HALF of your actual RPMS, unless you use a tach adaptor
** - In relation to Emanage, so from MAP to white wire, from Green wire to PCM
*** - In = from PCM, out = to coils

thats all referenced from ne jbody or something like that