I'm just wondering if theres a company out there that makes an MLS gasket for a 2.2LOHV.
I emailed cometic regarding a custom made jobber, but don't expect a reply back until Monday at the earliest when they are open again.
I wouldn't make this new thread if I didn't search first, and it came up with nothing
if anyone could lead me in the right direction with this it would be much appreciated.
thanks
Steve
<a href="http://www.cardomain.com/id/fireside"><img src="http://www.influx.ca/avatars/stevefiresig.jpg"></a>
i think event told me that nobody makes one (this could have changed since he told me this).
Land Pirates sail the open roads
DISCLAIMER: If anything I say offends you, I don't care..wear a helmet. Also, the information
I post is what I know to the best of my knowledge. If I am wrong, please correct me so that
others as well as myself may learn.
Premium sinc 6-17-04
nobody makes one, however I contacted Cometic once about custom making one and they can do it. You just need to give them all your measurements
I was a retard, and now I'm permanently banned.
ok cool
can they make one by taking measurements from a head gasket from another company?
ie: I have a felpro head gasket I'll donate if they can use that to make an MLS.
<a href="http://www.cardomain.com/id/fireside"><img src="http://www.influx.ca/avatars/stevefiresig.jpg"></a>
stevefire wrote:ok cool
can they make one by taking measurements from a head gasket from another company?
ie: I have a felpro head gasket I'll donate if they can use that to make an MLS.
you know... you could e-mail them, ask them if you send them the felpro gasket that they could just use that as a template and make it thicker.
I was a retard, and now I'm permanently banned.
you know... I did
<a href="http://www.cardomain.com/id/fireside"><img src="http://www.influx.ca/avatars/stevefiresig.jpg"></a>
Check out the last few posts on this thread.
http://www.j-body.org/forums/read.php?f=40&i=48369&t=48369
Quote:
Cavalier Connection also committed to funding the quantity necessary for Cometic to produce an MLS gasket for the 2.2L OHV engine, but haven’t yet delivered the 2.2L head and block Cometic needs to begin the process. Same deal we gave Jason (free gasket) would apply to anyone who delivers a 2.2L block and head to Cometic – any takers??
Jason
99 Z24
#25 to register on the Org !!
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
