Looking for a stock belt replacement for the m62 with a 3.1 pulley. Stock belt ran fine on the 3.1 pulley for a few years now but it's finally time for a new belt. I've read that many people just buy the stock lsj belt and cut a rib off. Anybody use anything else? I called a few stores by me and the only belt they have for the cobalt 2.0 is a Dayco 6060702
Anybody use that belt before?


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Just buy the Cobalt belt and very carefully cut the rib off. You can buy the 5 rib belt from GM but I think they told me it was $200 vs the $60 for a cobalt belt.