I need help figuring out where these hose go from my mbc. They took it off on the dyno in 2009 so I could run off the wastegate for whatever reason. I do not remember where they go besides the short one that goes to the wastegate.

The last time I used this I also was using the HO manifold, I do not remember if one of these lines were connect to the manifold, or another vaccuum source.

Thanks











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

It just T's in to your wastegate line. I have mine reading from close to the turbo so I just put it right in that line.

This may help




Edited 1 time(s). Last edited Thursday, July 14, 2011 2:32 PM

"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae

Ahh thanks Kris, that diagram brought back a memory how I had it ran I think. Thanks man










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Yup. Bottom hose to boost source, side hose is outlet.




Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!

onecleancavy wrote:It just T's in to your wastegate line. I have mine reading from close to the turbo so I just put it right in that line.

This may help

excellent diagram to identify the parts and installation of the turbo

regards



Simplemente uno más de ustedes