where can i buy a smaller pulley for my m45? what are my options?
01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners
does the m90 quikchange pulley system fit on the m45?
01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners
Contact Nathan at Smoothflow.. His Email is on his site...... $94 shipped.. Quality is awesome.... Just tell him what you have and what you want..
http://www.smoothflowpulleys.com/
P&P Tuning
420.5whp / 359.8wtq
thanks
01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners
i tried contacting smoothflow a few times, never heard back
BOOSTED / JMdecals.com! wrote:i tried contacting smoothflow a few times, never heard back
He got back with me in a matter of an hour or so by email....
P&P Tuning
420.5whp / 359.8wtq
I have a smoothflow. he was awesome, i just cant decide if i liked the product or the customer service better....
Boosted/JM... i guess he just doesnt like you....
And SORTA... the M90/M62 setups WILL WORK... but they are 6 ribs, ours are only 5. So it will work, you just will have an extra rib showing... and paoosibly a lil less grip, since you will be giving up the side edge on the "spare rib" side.
I would just go to Smoothflow, he was awesome. i cant even make up something bad to say about him or his work.
I have the 2.5" pulley on mine... it may be a lil much... my IAT's are ALWAYS crazy high... So depending on your purposes, you may want to go a lil milder.
I just sent him an email, hopefully I hear from him soon.
BOOSTED / JMdecals.com! wrote:i tried contacting smoothflow a few times, never heard back
Interesting, I generally reply to emails quite promptly. Are you sure you used the address sales@smoothflowpulleys.com?
icemike89,
I should have replied to you earlier, let me know if you don't get a message.
Thanks,
Nate
www.smoothflowpulleys.com
sales@smoothflowpulleys.com
Owner/operator of Smoothflow Pulleys & Machining.
Smoothflow Pulleys & Machining Modular Pulley System Group Purchase
nate i sent you paypal payment for a pulley. i dont know if u got my other message telling you that i want the 2.6" pulley. i forgot to include it in my payment info
01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners
ken soggs wrote:I have a smoothflow. he was awesome, i just cant decide if i liked the product or the customer service better....
Boosted/JM... i guess he just doesnt like you....
And SORTA... the M90/M62 setups WILL WORK... but they are 6 ribs, ours are only 5. So it will work, you just will have an extra rib showing... and paoosibly a lil less grip, since you will be giving up the side edge on the "spare rib" side.
I would just go to Smoothflow, he was awesome. i cant even make up something bad to say about him or his work.
I have the 2.5" pulley on mine... it may be a lil much... my IAT's are ALWAYS crazy high... So depending on your purposes, you may want to go a lil milder.
Oh well ill just go with PB since i can't get through to them then.
You honestly don't know what it takes to run the 2.5" pulley do you Ken? Oh well you will find out over time, i mean we can't tell you guys everything here on the forum. You learn general basic stuff here not secrets
BOOSTED / JMdecals.com! wrote:
Oh well ill just go with PB since i can't get through to them then.
He posted a few posts above you....... Go through Nathan and save yourself $80+ ...
P&P Tuning
420.5whp / 359.8wtq
BOOSTED / JMdecals.com! wrote:ken soggs wrote:I have a smoothflow. he was awesome, i just cant decide if i liked the product or the customer service better....
Boosted/JM... i guess he just doesnt like you....
And SORTA... the M90/M62 setups WILL WORK... but they are 6 ribs, ours are only 5. So it will work, you just will have an extra rib showing... and paoosibly a lil less grip, since you will be giving up the side edge on the "spare rib" side.
I would just go to Smoothflow, he was awesome. i cant even make up something bad to say about him or his work.
I have the 2.5" pulley on mine... it may be a lil much... my IAT's are ALWAYS crazy high... So depending on your purposes, you may want to go a lil milder.
Oh well ill just go with PB since i can't get through to them then.
You honestly don't know what it takes to run the 2.5" pulley do you Ken? Oh well you will find out over time, i mean we can't tell you guys everything here on the forum. You learn general basic stuff here not secrets
Only 90.00 for machined finish pulley system or 95.00 for polished, feel free to email me again and I'll get right back to you.
Nate
sales@smoothflowpulleys.com
Owner/operator of Smoothflow Pulleys & Machining.
Smoothflow Pulleys & Machining Modular Pulley System Group Purchase
adding to this, what would be a better pulley size than stock pulley if ur running stock internals? or atleast whats the limit.
"still want to smash that like the fist of an angry god"
if you are going with a smaller pulley, you should have alky injection running, period.
however, you could probably get away with the 2.7 pulley, but you will heat soak the blower like crazy.
______________________________________
2002 Pontiac Sunfire GT - Supercharged
nate?
01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners
The kit Im getting from a guy I believe doesnt have the stock 2.8 pulley with it, so Im gona run a 2.7 until I get the meth hooked up then go to a 2.6. Ive heard a few people running a 2.7 without meth and not having any problems, but any smaller and the iat's are realy hot. Im also gona have a fenderwell cai if that makes any difference
icemike89 wrote:The kit Im getting from a guy I believe doesnt have the stock 2.8 pulley with it, so Im gona run a 2.7 until I get the meth hooked up then go to a 2.6. Ive heard a few people running a 2.7 without meth and not having any problems, but any smaller and the iat's are realy hot. Im also gona have a fenderwell cai if that makes any difference
thats what i was running last year, 2.7 with true CAI with no meth, didnt have any problems, but the s/c was stupid hot.
______________________________________
2002 Pontiac Sunfire GT - Supercharged
well i found a deal on a pulley trade so im saving myself all the cash
Are the fuel requirements met with the M45 GM injectors that come in the kit using the 2.7" pulley or do you need to upgrade anything to run it...I was thinking about putting the 2.7" pulley on without the alky injection but not sure if the car would still remain reliable for a daily driver..
yes it is fine
and the m45 gets heat soaked like crazy no matter what
my 2.7 from Nate was awesome, great guy to deal with and the product was perfect
will definitely do business with him again
i used my boosted car for 2 years before i got another car for a daily and i ran the 2.6" just fine, remember a s/c only hits boost when you do a WOT pull, its a normal car otherwise.
