So ladies and gentleman, that is the "rough", finished project. Ill let you know how much of a piece of crap it is Tuesday or Wednesday.

I still need to get to work polishing this thing up with a bajillion different grits of grittiness, but besides that it's done.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

Nice.

ls1 tb?

Nice can't wait to see it all sexified

yes, BIG DOG throttle body LS1 on LD9 FTW.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

and a PSOne controller to boot. Snazzy, nice work, pretty manifold. I want one and dont own an LD9 haha.

if another one is ever made. OVAL RUNNERS from the getgo.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

I always wondered how one would get an LS1 tb to work on our cars.. As far as sensors and stuff..

Mani looks good.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Use kerosene as a sanding compound to keep your sand paper from loading up. It may sound stupid but it works great for polishing aluminum. For your finish sanding use a scotchbrite pad along with the kerosene.


If your interested in custom aluminum tilt wheel levers hit me up!

WHITECAVY wrote:I always wondered how one would get an LS1 tb to work on our cars.. As far as sensors and stuff..

Mani looks good.

If you have a flange, you can even make an LS1 throttle body work on a 2.3HO intake manifold, w/ a lil bit of fabrication.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

well didn't GM use a LS1 throttle body on their 1000+ HP ecotec?



Proud member of Jbody of Kentucky ... Click on sig to go!

looks sweet

karo had a 71or larger tb on his HO intake , and GM used a LS1 style tb on the drag eco's


them tb spacers we hate , make great adapters

did you use mini velocity stacks in the plenum?

looks like it'll make some serious power, unlike a certain other company's manifold for the J.



Built, bottled, ready for 11s. 14.446@93.74mph, 1.848 60' N/A.

[quote=97trd(???™)]looks sweet

karo had a 71or larger tb on his HO intake , and GM used a LS1 style tb on the drag eco's


them tb spacers we hate , make great adapters

GREAT IDEA!!!! me thinks this will make it onto my car

BTW Spy the mani looks awesome!

[quote=97trd(???™)]looks sweet

karo had a 71or larger tb on his HO intake , and GM used a LS1 style tb on the drag eco's


them tb spacers we hate , make great adapters



Too small to cover the end on a plenum of this size. Works on an HO manifold though fairly well.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

I had a shop on eBay fabricate a plate to mount my Northstar TB to. Unfortunately, I haven't gotten around to having the end of the HO manifold chopped and rewelded to the adapter plate.

By the way Spyhunter, the manifold looks good.


-

"Youth in Asia"...I don't see anything wrong with that.

Hi i have a very similar setup on my ecotec with the ls1 throttle body. Do you have any pics on how you setup the throttle cable? I used the ls1 bracket but its touching the hood and i was curious how u did it.

Here's a few pics so you can see. I think my cable sits on the other side from urs.

I'll have a pic of the setup installed, and you'll clearly see how i routed the throttle cable, but that will be on Thursday or Friday. I've got some kinks to work out and my JEEP needs some love over the next few days.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

looks good..... when are you going to be finished with mine?




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

SpeedRacerZ wrote:looks good..... when are you going to be finished with mine?

your wood and rock replica will be ready in 6-8 weeks.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

SpyhunteR wrote:[quote=97trd(???™)]looks sweet

karo had a 71or larger tb on his HO intake , and GM used a LS1 style tb on the drag eco's


them tb spacers we hate , make great adapters

Too small to cover the end on a plenum of this size. Works on an HO manifold though fairly well.


i was saying that more for use with other manifolds , it gives a geart start to those that dont have the necessary means to fabricate their own , since no one really makes them

I guess I was mainly wondering how our 2.4 harness plugs into the sensors and connectors of an ls1 TB.. ?

Ill be looking to upgrade from my measly 56mm here after my dyno..













~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

WHITECAVY wrote:I guess I was mainly wondering how our 2.4 harness plugs into the sensors and connectors of an ls1 TB.. ?

Ill be looking to upgrade from my measly 56mm here after my dyno..

Ummmm, you plug them in... same as any sensors.

sig not found

oh lol, i just thought for some miracoulous reason that the iac, tps and all that would be different on those tb's











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

WHITECAVY wrote:oh lol, i just thought for some miracoulous reason that the iac, tps and all that would be different on those tb's

dont worry man, i was thinking the same thing. who'd have thought the 2.4 and LS1 shared the exact same TB sensors and such.

weird. cool, but weird.

I was just wondering how this project turned out? Did you get any gains from this or did the project get dumped? I seen someone selling venom manifolds like this on ebay for about an $arm. It wasnt able to accept a tb as big as the one your using I think theres only accepted a 65mm. Anyway you did a nice job I would like to see the finnished product.