J-BOM dyno day today. Needless to say, I was surprised!!! Here's the graphs:

HP and TQ (top line is torque):



(the line that does NOT look like the HP line on the other is boost)



These were taken on Monkey Wrench Racing's Dynapack chassis dyno. This is the same place that has done both of my Cavaliers in the past.

STOCK ENGINE BLOCK AND HEAD!!!!!!!!!! Muhahahaha!!!!!!!!!

The weirdness on the right of the graphs was due to an oil leak I'm having with the turbo. The oil was getting sucked back into the intake and began burning off. Due to this, timing and other variables were beginning to screw up, so the car decided enough was enough and stopped making usable power. I'll have that corrected this winter.

If you want, I can post a vid of one of the earlier dynos. 1st pull was 211hp. 2nd pull was 254hp. This is because the turbocharger needed a lot of time to warm up to make a good pull.




I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">

wow excellent numbers man, congrats, got any pics of the setup? Also what turbo are you running on that setup?



"Horsepower is the Ultimate Accessory"

sweet.... just heard about it from Skilz

awsome job!




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

jimmyc99z24 wrote:wow excellent numbers man, congrats, got any pics of the setup? Also what turbo are you running on that setup?

Here you go:
http://www.j-body.org/forums/read.php?f=46&i=240134&t=234683&p=1

The 2nd line in that link tells about the turbocharger. Enjoy.




I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">

sweet numbers man

congrats





RIP JESSE GERARD.....Youll always be in my thoughts and prayers...

thats a sweet setup i went through your stuff you seem to have a really nice setup i would expect the same numbers im just surprised it came from a remote mount turbo setup but congrats man hope it holds strong and you start violating the streets with it. Good Job


*2012 mazdaspeed3*

congrats man



R.I.P. Brian Klocke, you will never be forgotten

Great numbers period regardless of where the turbo is mounted.


2000 Z24 5spd header & catback for now.

Thanks for the comments so far guys




I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">

Great #'s Andy! More than I would have ever expected for remote mount and stock engine.


15.3 @ 89.97mph, 14's on the way?

Geeez Andy my beater does that

Man those numbers are out of control! I had no idea that setup would push like that, You got skills for sure

Phlatcav wrote:Geeez Andy my beater does that

Man those numbers are out of control! I had no idea that setup would push like that, You got skills for sure

Naw. Jeremy still has me beat with significantly lower boost.

No matter though. Him and I will be equal in engine mods come this upcoming year.




I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">

this is making me want to do a remote turbo setup, my only snag is how to tune being it is a 96. congrats man and i hope it all to work for you and better numbers down the road.

Wow,, congrats man.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Mr. Pute wrote:

Phlatcav wrote:Geeez Andy my beater does that

Man those numbers are out of control! I had no idea that setup would push like that, You got skills for sure

Naw. Jeremy still has me beat with significantly lower boost.

No matter though. Him and I will be equal in engine mods come this upcoming year.

haha nop i meant YOU have skills

Phlatcav wrote:

Mr. Pute wrote:

Phlatcav wrote:Geeez Andy my beater does that

Man those numbers are out of control! I had no idea that setup would push like that, You got skills for sure

Naw. Jeremy still has me beat with significantly lower boost.

No matter though. Him and I will be equal in engine mods come this upcoming year.

haha nop i meant YOU have skills

LOL. Sorry dude. I'm tired. Before the J-BOM dyno day, I worked 30 hours straight the two nights before. I'm still recovering




I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">

hahaha, ive been there before man. heading there now

Again, awsome numbers Andy.


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

andy is da man

wow , that is pretty high for a stocker internally

and i remeber people saying remote turbos wont work. . .


nice andy


2006 Black Cobalt SS Supercharged G85
13.91@102.77

nice numbers!!



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

videos?

Yeah, wtf, no vid of your pulls?

Congrats .

Joe Schulte wrote:Yeah, wtf, no vid of your pulls?

I know!!! Mr. Airtonics had to go at that split second to get the pizza that he ordered. Oh well. I do however have a vid of the car during the 1st dyno run of 211hp if anyone really wants to see it (it sucks butt).




I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">