Intake Manifold
Didnt look like this has been posted before so here it is. Looks nice and its half the price of Hahns, might be worth looking into.
edit* I know its only a generic pic.
Edited 1 time(s). Last edited Wednesday, September 13, 2006 11:40 AM
Check out my car....
http://members.cardomain.com/o4blackfire
Wowe..that looks alot nicer then hahns...and nicer price as well..phil
it would be nice to see a pic. that one isnt for an eco in the picture. wont if its like venoms and its just an alumimum version
http://www.myspace.com/15102113
Yeah.. I saw that on Saturn Motorsports for over 600 Bucks and this just pops up. I hope to see a real picture
LE61T PTE6262 Powered 
I just called them and I got basic info I have to call abck to talk to the man
they dont stock them, they have the parts so they are made to order... but yes they do make us one, I will have more info in about 45 minutes
LE61T PTE6262 Powered
I wonder if it fits the stock TB or if its like GM's Intake mani and only fits larger TB's. Cuz i'm sure it could benefit some N/A motors if people are doing some crazy N/A Build-ups. I must admit I've always wanted to do a N/A Build-Up....keep us postes on that info QBE if you could be as so kind
...
they said that you need to call them directly because they have 3 different throttle body adaption options
90mm Mustang Throttle Body
LS1 Throttle Body
or
Stock Throttle Body
it also has velocity stacks at the runners as well
they are laso VERY limited on the items to make these
Edited 1 time(s). Last edited Wednesday, September 13, 2006 12:55 PM
LE61T PTE6262 Powered
QBE (The Boosted One) wrote: they are laso VERY limited on the items to make these
That last part sounds like the typical sales pitch, lol, but we need pic sof this thing, it sounds good!
I swear to God, Philbert...if you buy this somewhere else instead of letting me make it for you out of stainless, I'll re-route your dump pipe into your CABIN!!!
Seriously, though...are people interested in these? Is it worth me looking in to making them?
yea, and TB adapters to use other TB's
I have seen these manifolds for the Ecotecs in PERSON and from what the generic picture everyone uses on their website, it looks very close to it.
From the looks of things, that could be a Honda manifold, not 100% sure but the ecotec manifold looks very close to it minus the fuel rail support thingy which is on the top and no injector holes into the manifold. Also, they offer to make an ecotec manifold which you can run 4 more extra injectors as well but it sits further back on the runners. I measured an ecotec manifold that I saw and it did NOT seem like it would fit with the stock upper radiator support in place. Unless you notch the upper support I don't think you will make this manifold fit. I could be wrong but that was one of the first issues I could think of you would run into.
Also, last I talked to GE, they said they don't make this anymore for the Ecotecs....
they told me yesterday they do, but they do not stock the parts anymore, but they have enough parts from before to make a few....
LE61T PTE6262 Powered
yup, thats a honda b series manifold. Golden eagle is pretty reputable, but I don't think theres much of a market here for them, hence why they are "limited" on supplies.
Blew it up, build numbers coming soon
I contacted GEM directly today. They do not make them anymore and have no plans to again.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Team Vision Racing (aka hypsy) wrote:I contacted GEM directly today. They do not make them anymore and have no plans to again.
ummm... so did I.... and I talked to Robert and he said I could order one after he got the parts in, he may have possibly had some parts in stock to make one, who did you talk to?
LE61T PTE6262 Powered
Same guy. He said he could POSSIBLY make one or two but they wouldn't be cheap and that they wouldn't be producing them again.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
you know its sad ebcause no one ever knew they made.. we ened some marketing///
LE61T PTE6262 Powered
Not our fault. All they had to do was make it known that it was out there.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
I meant they need marketing, not us...
LE61T PTE6262 Powered
FReQ Z wrote:Agent Omega wrote:
Seriously, though...are people interested in these? Is it worth me looking in to making them?
yes please 
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
