Is anyone doing anything on their 2200 about the fact that there is a rubber coolant line from the thermostat housing running right next to their turbo downpipe?? Are you using a heat shield of some sort or just wrapping the downpipe in header wrap??
200 wheelhorse or bust
I wrapped mine
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
i have a eco, but there was a heater hose right in the way too, i bought heater hose and re routed it and also wrapped it as best as i could...
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
i wrapped my downpipe, haven't had any problems yet...but it won't surprise me if i do get a problem there
both my down pipe and my charge pipe run extreemly close to my water pump/ thermostat...I actuially took my thermostat out though.
horsepower is how hard you hit the wall, Torque is how far you push the wall with you
I cheated...fabbed a polished SS tube to re-route mine around the turbo and close to the fan.
hey (CUYOTE) wheres ur oil fill tube at?
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
