I'm having trouble finding the connector for tapping the plastic tank. I have heard from several car guys that there is a plastic fitting that will tap into the tank and adapt to a 1/8" NPT fitting, I can't find this anywhere (tried home depot, rona, canadian tire, and a couple of plumbing shops.) Does anyone have a picture of this fitting?
The best alternative I can find is I can get a 1/8" NPT tap, and just drill and tap a hole, screw the brass fitting in with some sealant, do you see any problems with this setup?
just installed the kit on my son's sunfire and we drilled and tapped the hole to 1/8th '' pipe thread it works just fine ....just remember that you should use a t/b spacer and tap that for the injector or you will have trouble with the sensors in the throttle body getting shorted out from moisture
littlejohn1
