i have 95 cavalier with a 2.2 and im have a t3 turbo with 7 psi what size injecters should i use and do i need to alter the ecm or use a piggy back sys

http://s161.photobucket.com/albums/t230/jcavalier/th_P3110259.jpg

At 7 psi you would be fine with 320 cc injectors. But if you plan on going much higher you should get something bigger than that. Also you should search about your car and injectors. You dont really have any injectors that you can just put in your car. You would need to convert to top feed. But do a search and you will come up with the info you need.

first of all what turbo do you have???? do you know how many different turbos there are with a t3 flange?

its out of a 280z

http://s161.photobucket.com/albums/t230/jcavalier/th_P3110259.jpg

your going to have to get a lot more specific than that. Or your going to have a real bad time with this project. I mean, someone might know what type of turbo came in those cars, but you need to really know this information---->>>>
We were looking for something more like........(inmycase) a T3 60trim with a 60/48ar with a aftermarket universal wastegate assembly set for 6lbs. The one that came with the turbo was a 10lber but i didn't want to start that high.

I'm just going to try and use my 2.4 24lbs 250cc (don't know if thats right) injectors and see if i have any problems with that. If I do, I'll step up with a afpr and some 320cc injectors.

if im only going with 7 psi do i have to chang injecters? and i dont no a lot about the turbo it with a intercooler and ebay manafold was $200 my boss was going to put it on a cavalier but the car got hit and all @!#$ up

http://s161.photobucket.com/albums/t230/jcavalier/th_P3110259.jpg