this might be a dumb question

I have a 2.2l ecotec with the stock tb... i measure the outlet on it a few months back at 2.75inches....

i need a 2.75inch to 2.25inch 90 degree silicone reducer... my charge pipes are 2.25 ....

any help is appreciated, thanks.

p.s. i am currently running a 2.5 inch rubber coupling that stretches over the tb, and i tighten down to 2.25 with a tbolt clamp.... and the pipe makes the 90 degree turn .... but i want the coupler to make the turn for better hood clearance...



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

check out www.intakehoses.com

or e bay probably will have something.

thanks man!

i couldnt find exactly what i needed, but i bought a 2.75 to 2.5 90degree (on ebay)... i will make it work... plus, once i get my intercooler, i will have 2.5 inch charge pipes, and i can use it then too...

thanks again..



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|