3inch exhaust sound clips - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
3inch exhaust sound clips
Friday, June 30, 2006 2:18 PM
for the turbo 2.4's lurking around i was wondering if you could post your exhaust setup if you are running 3 inch and hopefully you got a sound clip for it

thanks in advance






Re: 3inch exhaust sound clips
Friday, June 30, 2006 2:39 PM
I have a couple videos at home .... (2200 turbo, no cat with 25" res....SIDE EXIT)...... so it's as throaty as they get.. when I get home tomorrow I'll upload and post!

Lee




JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: 3inch exhaust sound clips
Friday, June 30, 2006 2:59 PM
I know QBE posted a video of his car with a 3" side exit, I thought I saved it but i cant seem to find it.

Edited 3 time(s). Last edited Friday, June 30, 2006 3:08 PM



Re: 3inch exhaust sound clips
Saturday, July 01, 2006 12:04 AM
bump




Re: 3inch exhaust sound clips
Saturday, July 01, 2006 10:29 AM
scott ill try to get one for you... i personally after having the 2.5" 3" would say go 2.5" for the power your looking for... 3" is fine and i guess will give you faster spool up but i dont think it works to well on our cars... my exhaust gas comming out my tail pipe are NEVER!!! hot its always cold and when fully warmed up after driving hard for like 40min it is just warm i could easy hold the tail pipe no problems... and this is not what you want with the gases cooling off in the exhaust... creates turbulance from what im told in the ehxuast and will cause it to flow worse then a 2.5"



The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno
Re: 3inch exhaust sound clips
Monday, July 03, 2006 8:43 PM
bump




Re: 3inch exhaust sound clips
Monday, July 03, 2006 9:40 PM
Here is a clip from the winter time..... cold start up....

2001 2200 turbo 2.5" mandrel S.S. downpipe to 3" mandrel exhaust, 25" res. with no cat, side exit...............

cold start up...

here: Cavalier 3" cold start up

Lee




JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: 3inch exhaust sound clips
Wednesday, July 05, 2006 6:08 PM
My turbo 2200 with 3 inch exhaust dumped under the shifter.....
http://videos.streetfire.net/search/sunfire/0/wm/024F3645-7ED8-46C4-A241-3F6A259C5556.htm

Before the car was tuned, and a massive boost leak.... http://videos.streetfire.net/search/sunfire/0/922DB1F5-BB75-4A6E-B2AF-B5894164026E.htm






275hp & 306tq - 1999 2.2 ohv
13.2 @ 108 mph
-1996 2.4 liter + Turbo + Built motor + Torco + More boost = Lots o' Power
-2000 Mustang GT + 2004 Cobra motor, Whipple 2.3 supercharger,
built rear-end,Dodge Viper spec T56 6 speed, bolt-ons = wheelies at the track!!!!!

Re: 3inch exhaust sound clips
Wednesday, July 05, 2006 6:59 PM
turbo 2.4, 3inch exhaust, no cat, no muffler, 22psi of boost, 410hp & 404 torque

http://videos.streetfire.net/video/2331c73f-2f89-4818-812a-80b36f02fdae.htm


275hp & 306tq - 1999 2.2 ohv
13.2 @ 108 mph
-1996 2.4 liter + Turbo + Built motor + Torco + More boost = Lots o' Power
-2000 Mustang GT + 2004 Cobra motor, Whipple 2.3 supercharger,
built rear-end,Dodge Viper spec T56 6 speed, bolt-ons = wheelies at the track!!!!!

Re: 3inch exhaust sound clips
Wednesday, July 05, 2006 7:07 PM
One more.....
The same Cavalier from above but with the 3 inch exhaust, Catco 3inch cat, and Magnaflow muffler,
http://videos.streetfire.net/video/bdb1c508-e344-4820-b883-a5a05accedf2.htm




275hp & 306tq - 1999 2.2 ohv
13.2 @ 108 mph
-1996 2.4 liter + Turbo + Built motor + Torco + More boost = Lots o' Power
-2000 Mustang GT + 2004 Cobra motor, Whipple 2.3 supercharger,
built rear-end,Dodge Viper spec T56 6 speed, bolt-ons = wheelies at the track!!!!!

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search