The aeromotive afpr i got that bolts right onto the fuel rail touches the cables that open the throttle body plate... i put the cables over the throttle body and some times there is so much tension that the cable holds the throttle body plate open

Aeromotive P/N 13107

http://www.distinctdev.com/turboinstall/front_view%20(Small).jpg

^^ thats it while i was installing it, i can get a pic of it installed so you can see the exactly what i mean, but for those who understand my attempt of explaining this, is there a solution? relocation, modification to make these parts not be touching?

both the cruise control cable and the gas pedal cable are in the way...



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

did you try running the cables over the top of the fpr ?

also might try a small spacer under the cable bracket on the bolt closest to the fuel rail to lessen the angle going over top of the fpr


just a thought

I'd do what he said^^

I dont have that problem with mine. My throttle cable runs on top of my AFPR. Never noticed any rubbing or throttle stickage...



~Riki

SPONSORED BY: No one!
Car Domain Site

right now, they are running over the top of the afpr... do you guys have cruise control? cause that cable is the worse one...

if i put a spacer on the fuel rail, then wouldnt it be to far away from the injectors?

any other ideas?



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

no put the spacer on the throttle cable bracket

it is held down with 2 bolts , put the spacer on the bolt closest to the fuel rail

I run mine over top of it and I also no longer have cruise control in the way



1989 Turbo Trans Am #82, 2007 Cobalt SS G85

what was your solution? the spacers?



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

i ran mine under the afpr.....and it works just fine.


*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**