i was hooking up the vacuum lines today, i was running the manual boost controler line to the wastegate however it has two nipples and im not sure which one i use. they are side by side. sorry i cant get a picture to show you. its a garret turbo. does it matter which one i use?. thanks

I used the nipple that is furthest away from the actuator arm..............

here is an example.... just to clarify..... (notice where the wastegate signal is connected.......

this pic makes me sad...... I took it when I was rebuilding the turbo.....



good luck......

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...

here you go. read my post and it took two minutes to find this on the search feature. just typed in dual port wastegate.
http://www.j-body.org/forums/read.php?f=40&i=86545&t=86495#86545


01 Z24 Turbo /// First Reflashed Turbo AUTO MMMM YUMMY