Ok I am in the market for some new Injectors for my 2000 2200. (high impedance)
Right now I am running the Gm S/C injectors at 9-10 psi. But I am maxing them out. (310cc)
So my question is I know DSMs come with like 450cc injectors, but I cant find out if they are High or low impedance.
I am basically going to go to the junk yards looking for any injectors larger than 350cc.
Any help would be Much appreciated.
Any other Injector advice is good too.... Go figure I never took the time to think I was ever going to be running more Psi, but I am now. lol So time to learn really quick.
370cc from the eco charger kit maybe?
I've got a set off my Cobalt SS that I have no need 4 since I bought the Stage 2 kit.
Modds:
GM Stage 2 with SFPHQ 2.8 pulley
Injen Intake
GM Dual Pass Aftercooler w15psi Surge Tank
GMPP Exhaust Manifold
CTi 3" Downpipe and Cat
Custom 3" Cat Back with Dynomax Super Turbo Muffler
ZZ Engine Mount
ZZ Front Trans Mount
B&M Shifter
NGK BKR7E Plugs
DC Strut Tower Brace
Soon to be installed:
2.6 pulley, Siemens 60lbs Injectors, NGK 2 Step Colder Plugs
Tune Time Custom Dyno Tune
The DSM are low impedance..... I have a set of 450cc in the drag car (95)
you also need a way to get them to seal in the head.
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
Damn, Well I guess using the DSM ones are out of the question. lol
East05CSS I sent you a Pm about your 370cc.
1sec, i'll upload the this list of injectors/sizes/impedance/etc that all fit for the 2200 someone posted back in 04.
N2O + Bolt-ons
= 220Hp/
250Tq
Coming Soon:HpTunersPro, EagleConnectingRods, WiescoPistons, 13sec2200
Lemme know if this was of any help to you!
http://rapidshare.de/files/22377335/Fuel_injecotrs_for_2200.doc.html
I think Slowej posted it? It's basically a small list of injectors compiled mostly of GM cars. Most have probably seen it, but here it is again anyway!
N2O + Bolt-ons
= 220Hp/
250Tq
Coming Soon:HpTunersPro, EagleConnectingRods, WiescoPistons, 13sec2200
Add to the list if you can (other makes and models that will fit)! Upload it and send it back my way so I can continue to have this archive of info for the OHV
N2O + Bolt-ons
= 220Hp/
250Tq
Coming Soon:HpTunersPro, EagleConnectingRods, WiescoPistons, 13sec2200
