when your engine starts it turns the crank pulley that turns the supercharger and it turning shoves air into the engine
however that setup doesnt look complete because supercharger should have its own intake manifold the HO manifold pictured there, theres no way to use it in an eaton setup
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
actually, a roots blower doesn't need to have a special intake manifold... check out the way the jackson racing Miata supercharger kit mounts....
but that looks very homebrew and i for one wouldn't trust it...
Arrival Blue 04 LS Sport
Eco
Turbo
Megasquirt
'Nuff said
Yeah, that's the part that confused me. That and the mangled contraption he has pictured on there.
to use that it will take alot of custom fab an being able to tig aluminum that supercharger is off of a grand prix gtp or a
bonniville that contraption is to try to reto fit the supercharger to the head with probbly won work an is why it being sold you will need to start from scratch!!!
hahaha thats farmerz24's @!#$.
it worked, but man was it ever hack.
the super sits on the pipe (or magled crap in the 2nd pic) and then goes threw a u bend into the t/b on the ho................you have to cut a hole in your hood for it to fit.
*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
hahahaha dude, a cav with a supercharger sticking through the hood would be so badass
too bad the hardware looks like crap
Arrival Blue 04 LS Sport
Eco
Turbo
Megasquirt
'Nuff said
Quote:
2.3 underdrive pulley for the 2.4 for more power,
Woohoo for underdriving ALL of your accersories.
NO NO NO...... you wont have to start from scatch. like one guy said the sc bolts to my "mangled" manifold and this sits ontop of the 2.3 manifold. a 180 bend brings it back into the 2.3 manifold. the tb is located on the end of the sc. the advantage to this "hack" kit is that it can be intercooled.
the 2.3 puley is required to run 5.5psi, stock pulley will put you around 12 or so i think which is too much.
QUICK2.4 you dont need to tig anything. the sc bolts to this manifold in the other pic.
and as for ghetto, youd be surprised what paint can do to make it look better. i gave it a quick shot of silicon to make sure there were no air leaks. youd be surprised how good this manifold flows however......
someone should buy it, its a cheap way to get into the 13's-low low 14's 's at only 5.5 psi. i destroyed a 01 4.6 mustang gt 5 spd with this like 5-6 lengths by 70-80 mph. and it was my friend driving, we did this several times even from a roll i pull instantly on it.
anyways, someone should buy this. the looks you get when crusing is well worth it. (is that a s.s.s..s.supercharger sticking out of your hood????)
NO its my aftermarket AC ... yes its a sc. what else would the belt be drving??
anyways ya someone bid it up or gimme an offer.
farmerz24
sad thing about all this is some dumb ass is going to buy this and get all excited and be dissapointed when his/her sweet SC doesnt work!!! LOL
RICE DONT MEAN YOUR SLOW
sad thing is you didn't read..to know that it did work on someones car...
actually the person above your post is the one who made and owned it...sounds to me like it worked fine
it woorked great when it was running
*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
yo, farmerZ, you really need to email me some pics of this thing installed lol
Arrival Blue 04 LS Sport
Eco
Turbo
Megasquirt
'Nuff said
Wow, I wanna see pics of it installed.
i remember seeing a picture of it. pretty cool.
want want want...why not buy it and try it out yo!
INSTALLED PICS
STREET ANTIX, it's coming...
Im with everybody else, I wanna see installed pics lol
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
yea im kinda interested myself....lets see em
Scarab (Jersey Jay 1.8T) wrote:hahahaha dude, a cav with a supercharger sticking through the hood would be so badass too bad the hardware looks like crap
Doesn't Raven have his sticking through the hood?,, granted it's the 3800. I can't remember,,, been too long since I've seen pics of his ride, but I knew had to cut the hood
"I'm sick of following my dreams. I'm just going to ask them where
they're going and hook up with them later." RIP Mitch Hedberg
^^ Nah I dont think his S/C ever stuck through the hood because it was able to fit under there.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Looks like it's through the hood to me
Sure we can argue that it's just the plastic cover pking though,,, but as far above as it is, I doubt the SC itself would have cleared even without that shroud.
"I'm sick of following my dreams. I'm just going to ask them where
they're going and hook up with them later." RIP Mitch Hedberg
Sorry for the thread jack, but back on topic, I would love to see some installed pics too
"I'm sick of following my dreams. I'm just going to ask them where
they're going and hook up with them later." RIP Mitch Hedberg
