so I believe that I can make a simple aic(additional injector controller).
something that looks at boost and tach signal.. or either one individually..
I believe that I can make it for around 150 withount injector.
horsepower is how hard you hit the wall, Torque is how far you push the wall with you
Check out the Haltech F5 Unit.
www.haltech.com
www.kronosperformance.com / 732-742-8837
There's already a bunch of controller. When you get them use, they are usually around 200$ from big company like Haltech.
Gilles
2.3 Ho
josh no boost for you
<img src="http://www.jokr.org/jeremy.jpg"> He's no good to me dead-Boba Fett
I highl recommend just buying a Greddy or SDS system. You can get them used around the sam price.
I have to say thogh, if you built one yourself, it would NOT cost $150.... try like $30.
Instead or rigging a triggering system with an RPM base, just use an oil pressure refference with an afterrmarke sending unit and an air pressure based variable resistance to pick p boost... the rest woul be relatively simple.
Cardomain|
Myspace
