The closest i could find for a write up was this link which i am more than grateful to find. But the pictures dont show up. Does the harness for the cruise module run across the firewall, and go through the firewall under the clutch reservoir, only to go to the 2 cruise control release switches, and the cruise button? Am i suppose to snip the wiring harness next to the firewall, and run my own wires through the firewall to these 3 switches?

Lenko, John Lenko wrote:Ok, control unit changed in 99. 95-98 are the same, so are 99-05. The cable is different, based on the engine. The switch is the same. The release switch (on clutch and brake on manuals, only on brake on autos) is different but only between manual/auto. 95-05 are the same. The mounting bracket obviously is different depending on engine..

Now, if that's correct, i think im ready to do this. But if im forgetting anything i have to do, let me know!

This is for a 1996 Cavalier 2.2 OHV 5-speed.



"If I'm not back in 5 minutes...just wait longer"