Frustrating Alpine IDA X100 Problem - Audio & Electronics Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Frustrating Alpine IDA X100 Problem
Thursday, December 04, 2008 6:10 PM
The cable that goes from the USB connector to the iPod started to go so I ordered a new one. Now another problem has presented itself, the cable is exactly the same direct from Alpine's warehouse yet whenever I connect it I get a "USB Device Error" message. Any ideas?

Re: Frustrating Alpine IDA X100 Problem
Thursday, December 04, 2008 8:21 PM
you are asking us rather than Alpine? They should be able to help you out.


On the other hand....you have other fingers.

In my family we teach that boys have a God-stick and girls have a Shame Cave. -John Stewart
Re: Frustrating Alpine IDA X100 Problem
Friday, December 05, 2008 7:31 AM
I just figured I would try here before I take the car to my installer, cause most likely hes probably clueless.
Re: Frustrating Alpine IDA X100 Problem
Friday, December 05, 2008 6:55 PM
Take it to the place you had it installed. If they have half a brain they'll swap your deck out for a working one to test because I'm pretty certain that, as long as your USB is plugged in fully, it should just... work.



Re: Frustrating Alpine IDA X100 Problem
Friday, December 05, 2008 7:07 PM
Yeah faulty cable, we tried it on multiple units and it just wouldn't go. Naturally as things go, as soon as I ordered it the problems with my current cable became less frequent.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search