Would anyone by chance have a headlight wiring diagram???

Matt

Oops... I guess the year and make would be helpful: 2000 z24

Best I could find was this thread...
http://www.j-body.org/forums/read.php?f=4&i=97990&t=97976#97990
04's same wiring as 00??

Objective...

H1 mazda 6 headlight to original headlight wiring (low beam)
H1 mazda 6 headlight to original headlight wiring (high beam) Separate bulb from low beams
H3 mazda 6 fog light to original fog light wiring
2357's for signal lights

Current problem...
1) 2357's are working fine, I've rewired the OEM wiring to an aftermarket 2357 socket harness. Signal works fine with the multi function switch and hazards work fine. When I turn the parking lights on or headlights on, the tail lights or front singals don't turn on.
2) When I turn the lights on or parking lights on, the cluster lights dont turn on, and I cant get my fog lights switch indicator light to turn on
3) The drivers side headlight wiring (blue wire) gives me 12v and I can have the H1 light on, even with the car off.

I've replaced the DRL relay and multifunction swtich, checked all fuses as well.

I still get the bla bla bla click click click service light, even after changing the relay.

Am I looking to insert a 30amp relay inbetween the H1 lights and the OEM wiring?

Any help would be awesome.

Matt

i've got nothing for you right now, but if i remember to do it at work i'll try to get one off all-data for you. idk if i can save the pic to the computer and upload it to my photobucket or not. never tried. like i said, i'll try to remember tomorrow on my lunch to check back in here and see if you got one, and if not try to get one up for you.

http://www.j-body.org/forums/read.php?f=7&i=315239&t=315239

00-02 Cavalier
Driverside
High Beam Ground = Blue
Positive = Dark Blue
Low Beam Ground = Pink

Passengerside
High Beam Ground = Pink
Positive = Orange
Low Beam Ground = Dark Blue

its not a diagram, but at least its a wiring layout.



1997 Cavalier Z24 - 15.647 @ 88.02 MPH

Thanks whitegoose...sykeeok for your help.

ended up finding this on the dark blue positive driverside on the wiring harness.





the schematic helped a lot.

For anyone else with DRL issues... sometimes the multifunction switch or relay isnt the answer... I found this out the hard way...


For anyone that doesnt know, this harness conneciton is located just underneith the battery.

Matt