Well I've been working on some taillights for quite some time and I'm planning on working on the harness now, being it uses all LEDs some of them are permanently mounted in the taillight housing. So i need to make a disconnect in the wiring if they ever need to be removed.. Now i know i could use male and female terminals but thats somewhat hassle when removing and reinstalling. plus a plastic connector would have a more professional install look, and even though u wont really see it, thats what im about. Anyway, i've checked all the auto part stores, all hardware stores, and any other place carrying electrical stuff around here with no luck. i did some google searching and didnt really find what i was looking for either. All i've been able to find are Tow Hookup adapters that i could cut and use both ends, but there kinda a PITA to pull apart from each other(esp in tight areas and without ripping the wiring lol)
Anyway to elaborate, Like connectors on a cars harness where they may be like 12pin that u push in a little tab and the plastic connector easily pulls apart. thats what im looking for, but 6pin.
anyone have any sites i would be able to find such a thing? perferably with prewired leads i only need to solder onto.
^^thanks, muffin also sent me a pm(i think hes out of posts for the month) with a link for some. I had some questions, tried their live chat and i was actually impressed with the help lol. But thanks.
btw for anyone else might be looking. here is link i got
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=092-560
Your looking for Molex Connectors...
Nvm I see you found that in the link lol..
The only thing is they take a special crimper, and there are a few different kinds...
And yes partsexpress rocks
