Hey guys,
I just bought the new pioneer avic-d3 and am getting ready to install it. I am just wondering where the speed sensor wire is. I have read other posts but they dont give a definite answer for this question. I am wondering what color and where i can splice into it so that my gps for my navigation is perfectly accurate at all times. Any help would be appreciated.
thanks

any help?

what do you drive

2003 pontiac sunfire with the ecotec engine

umm right here and now i cant give u a deff answer on that i can tell you before this time tomorow when i go to work but a 2000 sunfire it is the purple wire on pin 61 on bcm, i wouldnt trust that but for now just locate yoru bcm and ill let you know by tomorow

Speed Sense dk. green/white PCM, blue plug, pin 34


from directechs but its for an 04...i know the 03-04 are a little different but this might be the same...any one else? DT doesnt list one for an 03...sorry

hey guys...so i started looking and i think i found it...there are 2 dark green/white wires..sorry for the bad pic but they are the two green wires in between the white ones. So how can i tell what pin it is in? Also i am looking in the right plug right? (bottom pic blue bottom) sorry for the dirty pic

if you have a dvom you can test it. Its a PITA to test it but what you would have to do is lift the front of the car....put it drive and test the wire with your dvom set it AC current. Or just hook it up if it work then good if not switch it....post pics when your done with you d3 install.....i wanna see how it looks cuz i can get one for a good price...GL