http://www.subwoofertools.com/forum/ported-box.asp?Ew=32&Eh=16&Dia=9&Xmax=27&Vd=.127&NumW=1&Vb=3.5&Fb=28&Qts=&Vas=&Fs=&CE=0

this is proble the box ill be building but i dont know much about the ports so if i take the hole of the port from going out the side to going out the back? since our car's trunks get skinny right where the port would go out would it affect the breathing of the sub and make it a little more sealed and loose my frequency a little bit or will it be fine and change nothing?


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com

no one knows?


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com

That's for one sub, facing forward right?

yea its vertical facing the back of the car


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com

Your best bet in the situation would be to face the sub towards the rear, port rear, unless you plan on sealing it from the trunk.

Try like this: http://www.subwoofertools.com/forum/ported-box.asp?Ew=32&Eh=16&Dia=9&Xmax=27&Vd=.127&NumW=1&Vb=3.5&Fb=33&Qts=&Vas=&Fs=&CE=0

28 hertz you won't like for daily.

well i already started cutin it so its 28hz. i wont play it hard daily cuz i know it will give me a headache easily. already has today easily and i have it on
-10 (cd player) in a 5 cube sealed box( playin on low volume to break it in a little.) on my link i might just have the sub on the same side or opposite of the port i just dont know how deep my trunk is going to go. would mounting the amp on the box be bad since its going to be moving so much n causing vibs or does the box move just as much as the car?


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com

I'd have the port and the sub on the same plane.