Is this the correct wiring to run these at 1 ohm?
yes
--------------------------------------------------------------
Offical dealer for the following-
SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW
yes all positives to postives and neg to neg...
"Silver 2001 Cavalier z24 5 speed 2 door sunroof and power everything "
AEM Short Ram Intake
B&M Short Throw Shifter
yes thats correct and thats going to sound good
In parallel, the calculation is generally (ohm1 x ohm2) / (ohm1 + ohm2) do that over and over in pairs until all voice coils are accounted for. dont do it all at once. Doing that, it comes out to 256 divided by 16. Obviously that isnt right. whereas if you do it by pairs, it comes out to 16 / 8 = 2 (twice, once for each DVC speaker) and then 4 / 4 = 1.
Man, was it ever a b!tch to figure out how to get my 6 ohm DVC's to run at 2 ohms. I just decided to run 3 voice coils all in parallel. (3x6=18)/(3+6=9) = 2 ohms.
For those of you who read about me putting my home speakers in it, I took 'em back out. Fell over too often
I had 'em runnin at about 2.5 ohms though
But, from what I've heard, kickers kick harcore @zz
