I was wondering who to get ride of those annoying day time running lights. I read somewhere that if I placed a jumper wire in the fuse panel on side of the dash on the driver side, it would kill the lights and not set a code. But I would also lose a high beam. I don't lose them highs if I just remove the black box (can't remember what is called) but I have a service light on. WHAT DO I HAVE TO DO TO END THIS?????
search it's all over.
go to bcm under dash (white box says bcm)
go to middle plug cut dark blue wire ( ithink better check)
ground end that is still connected to bcm and your done thats the basics but i did mine a while ago so just double check make sure it's the dark blue wire cuz i believe there are 2 blues one light one dark.
just hook up a relay to the ebrake that is what i did works great.
keep beepin azzhole im reloading!!!
its easier to just do what fatalic cavi said, and no, there are no side efffects to the BCM trick
You'll never touch God's hand
You'll never taste God's breath
Because you'll never see the second coming
Life's too short to be focused on insanity
I've seen the ways of God
I'll take the devil any day
Hail Satan
(slayer, skeleton christ, 2006)
