i cant't find this.... - Audio & Electronics Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
i cant't find this....
Tuesday, October 11, 2005 5:39 PM
the closest thing so far is i found this in the archive, but the link has been deleted....

==========================================================-
Re: Fog Light With High Beam...
==========================================================

Viper98912 Monday, October 06, 2003 10:04 AM

----------------------------------------------------------------------------------------------------

read this http://www.j-body.org/forums/read.php?f=7&i=187841&t=187841
what you have there is for a 99- car, this link here is for 00+ cars.

--------------------------------------------
Yes I am f'in premium, so back the f' up.

<img src="http://www.j-body.org/registry/viper98912/personal_pic.jpg">

========================================================

bsides that, i cant find a thing on hooking up fogs with high beams, for 2000 + car

i have an 02 if anybaody cares to assist me...........
AND if i start getting paraded about "" do a search, do a search ""

well I DID, for like an hour......... no joke....
searched in archives, and not archives, in different forums, in generals, in FAQ's in stickys.... there's nothinng else left..........on the godd side learned a few interesting things.....






wait for it... wait for it... NOW GO!! ---> '02 LS Sport <---
Yahoo IM : buzz122 AIM : buzz122cav

Re: i cant't find this....
Tuesday, October 11, 2005 5:45 PM
http://www.j-body.org/forums/read.php?f=4&i=55837&t=55837&arch=1#55837

if that's what your talking about...i found it in about 3 seconds


--------------------------------------------------------------
Offical dealer for the following-

SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW

Re: i cant't find this....
Tuesday, October 11, 2005 5:51 PM
For old messages... they go into the archives.... add "&arch=1" to the end of it... like this...

http://www.j-body.org/forums/read.php?f=7&i=187841&t=187841&arch=1







Re: i cant't find this....
Wednesday, October 12, 2005 6:19 AM
Lenko, John Lenko<----- thats what i was looking for......... Thank you

wysiwyg <------ thats the link i used to quoote my post.... and the link in there doesn't work, either ar home nor at work.....

BUT..... since i couldn't find anything on it, i did a littole bit of playing around... and found this out myself...
There is a REALLY REALLY REALLY easy way to do this mod...

HERE IT IS:

1) remove radiator shroud
2) find BIG gray relay on drivers side
3) unplug relay, youre only concerned about the wires going into it.
4) remove electrical tape from those wires.
5) find a brown wire, and a purple wire.
6) cut both of them about 3 inches away from plug.
7) tape off both wires that go into the plug, thise will not be used ( or what i did is, striped em, and used a butt connector on each one)
8) now strip the brown and purple wires that are coming out of the harnes, twist them together, and then use a butt connector.
9) use electrical tape to make it look all nice and purdy like from factory, plug the plug back in, but not necesarry. It'll keep the wires from dangling around.
10) reinstal shroud, and enjoy !!! Easy as that.



wait for it... wait for it... NOW GO!! ---> '02 LS Sport <---
Yahoo IM : buzz122 AIM : buzz122cav
Re: i cant't find this....
Wednesday, October 12, 2005 6:20 AM
I'm gonna get this put into the HOW TO's




wait for it... wait for it... NOW GO!! ---> '02 LS Sport <---
Yahoo IM : buzz122 AIM : buzz122cav
Re: i cant't find this....
Wednesday, October 12, 2005 6:32 AM
The way you described it, your using only one side of a butt connector.



http://members.rankmyride.com/djtorello
Re: i cant't find this....
Wednesday, October 12, 2005 6:34 AM
yeah, the other side i just left alone, like if you want to add something later on, or reconnect the wires.... at any point.



wait for it... wait for it... NOW GO!! ---> '02 LS Sport <---
Yahoo IM : buzz122 AIM : buzz122cav
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search