Would it take to do a cavalier trunk in square footage??

i think i did mine with 5 sheets of dynamat which would be 30sq feet. there were a lot of extra pieces and shreds so im sure it was less than 30sq ft.




Peace Out!!!

i bought 20 sq feet and i still need more, so there is an ideal. i have a 2000 cavi if that makes easier.

Mine's an '00 also. thanks guys, I'm tryin' to get an idea of how much I am gonna need.

Well i used 80 sq ft of fatmat for my entire car. I think it was about 30-35 Sqft for the trunk.



http://members.rankmyride.com/djtorello

Get brownbread instead of Dynamat, its less than half the cost and works better,

http://www.b-quiet.com

Check on ebay for it you can normally find 150sqft rolls of it for 200 bucks or so.

Read my last post, for actual prices. The person above me is alittle off.

http://www.j-body.org/forums/read.php?f=4&i=107508&t=107508





http://members.rankmyride.com/djtorello

Hey Crystal, LMR doesnt know what he's talking about. If you buy straight from the b-quiet web sight you spend 239 for b-quiet ultimate for 100 sq ft plus shipping. If you go to ebay you get it for 199.


And LMR I made a typo...Sue me.

^^^^ Yet i continue to prove you wrong. yesh. grow up.



http://members.rankmyride.com/djtorello

how have you proved me wrong... enlighten me oh bringer of all knowledge

Well, to be honest, I wasn't sure if I was going to get dynamat, fat mat, b-quiet, or whatever else there is, I just needed to know how much. Thanks for the help, though!

I have a mat that is better quality for 89.95 plus shipping...ur on SJ so we can just talk over pm on there or w/e

buy as much as you can afford, a quite car is a nice car.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

Peel N Seel/ Roof Adhesion = the Cheapest and almost as good way to go in many cases. That site posts up comparisions and specs of all the sounddeadeners etc so you can see which one actaully does the best.

www.ikesound.com sells a 122sq Foot package for cheap (dynamat)



My Cav
I give up...
i'm buying a VW those people love trees, so they should love eachother too... "Andy"

ASTM E756 @ 200 Hz:
0.24 @ +0C (+32F)
0.26 @ +10C (+50F)
0.42 @ +20C (+68F)
0.26 @ +30C (+86F)
0.19 @ +40C (+104F

dynamat

ASTM E756 @ 200 Hz:
0.23 @ +0C (+32F)
0.26 @ +10C (+50F)
0.39 @ +20C (+68F)
0.32 @ +30C (+86F)
0.24 @ +40C (+104F)

brown bread

Acoustic Loss Factor ASTM E756 @ 200 Hz:
0.23 @ +0C (+32F)
0.26 @ +10C (+50F)
0.39 @ +20C (+68F)
0.32 @ +30C (+86F)
0.24 @ +40C (+104F)

b-quite ultimate

Acoustic Loss Factor ASTM E756 @ 200 Hz:
0.16 @ +0C (+32F)
0.19 @ +10C (+50F)
0.29 @ +20C (+68F)
0.20 @ +30C (+86F)
0.14 @ +40C (+104F)

b-queit Extreme

= the sites specs on the products.



My Cav
I give up...
i'm buying a VW those people love trees, so they should love eachother too... "Andy"