ok i read the how to reprogram the keyless entry remotes in the faq or wherever it is but there was a part i didnt get...it says to unhook the two harnessess from the control box and "jump them" ...what exactly do i have to do?
96 cavi'/WI j's
jump = connect
-- The The One One --
<IMG SRC="http://registry.gmenthusiast.com/images/neo32843/personal_pic.gif">
just stick a piece of wire in the connector to short/connect the two wires
"Official Jewish J-Body"
i used a paper clip make sure its good and in there and stays in ther ethe entire time or reprogram
2006 Cobalt SS 2.4L 9.6 @74mph 1/8th mile w/2.28 60ft
in the trunk on the drivers side, begind the carpet.
"Official Jewish J-Body"
