Zex Dry Kit issues - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Zex Dry Kit issues
Tuesday, April 10, 2007 11:48 AM
OK guys so here's my problem. The car had been sitting and not driven for a while now and the Zex kit in the car hasnt been used in over a year and a half. I have a purge kit on it as well which has its own issues but with everything connected and the system armed I read on my guage that I have bottle pressure and the nitrous goes to the purge but when I put the peddle at W.O.T it doesnt seem to spray, from what I recall I used to be able to hear the system "click" as it opened but I get nothing. The fuse is good so any ideas where I should start doing my checking?

Re: Zex Dry Kit issues
Tuesday, April 10, 2007 12:47 PM
microswitch,solenoids,check all wiring,grounds,etc;



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Re: Zex Dry Kit issues
Tuesday, April 10, 2007 3:51 PM
sounds like it may be a stuck relay if u have a realy on the system
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search