On an ecotec is it nessesary to use any of these with a "wet" nitrous system?
FPR
Walbro Fuel Pump
Aftermarket fuel rail
i dont know if anyone even makes a fuel rail or FPR, i can use a rail off a Saab turbo if i have to right?
the stock feul rail is good for up 600 hp i think.
you should not need any of those. use premium gas, colder plugs. and you will be good
Im a Xbox 360 fanboy...and damn proud of it!!
no. none of what you said is needed. just keep it at a 75 shot or less and do what 99redZ24 said.
yep premium and colder plugs will do 75 for ya.
Fuel rail wont be a problem in your future,
pump, only if yours starts to go bad
fpr, doesnt hurt, but not needed.
safety features:
wot switch (figure it came with it)
fuel pressure safety switch (just incase it drops low)
rpm window switch (so you dont hit rev limiter)
another nitrous solenoid ( blocks from one sticking )
100 shot and you should really look at msd-dis2 to retard it a little bit
possibly something like an safc-2 to help adjust the curves a little bit.
http://www.aplusperformance.com
http://www.modified-motorsports.com
ok great input guys, where can i find an adjustably FPR
on ebay --- but you will not need one i did 34 bottles on the 75 shot with colder plugs and premium fuel
