2.4l question - Third Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.4l question
Thursday, February 19, 2009 6:27 AM
I have a 2000 alero I changed the plugs and the far left plug when I pulled it out was filled with oil and was wonder how bad this problem is and how to fix it thanks for your support

Re: 2.4l question
Thursday, February 19, 2009 6:35 AM
"Filled with oil" ... does this mean:
1. plug threads were oily
2. looking in the spark plug hole it's filled with oil
3. between the camshaft towers where the spark plugs go there's puddling and oily surfaces
4. plug tip was soaked in oil

Could be anything. Piston rings allowing oil to leak into the cylnder, camshaft tower cover gasket leaking (most likely) which allows oil to drip down into the spark plug area and go down the threads like mine did.


2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
Re: 2.4l question
Thursday, February 19, 2009 6:40 AM
The whole plug and socket was dripping with oil. It was like a pool of oil and the car has been miss fireing on one cyclinder that's why I changed the plugs
Re: 2.4l question
Sunday, February 22, 2009 2:21 PM
do you not have your crank case vent tube hooked up to your intake (like a breather filter or something else). cause i had that same problem hooked it back up to the intake and it stopped


It wouldnt be any fun if it was easy.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search