where does the small vac. line on the FPR on the ecotec connect to?
mines not hooked up and idont know where it goes
intake?
intake manifold?
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
The fpr line connects to the intake manifold. It's below the fuel rail a little bit between Cylinders #2 and 3. You might have to look for it, but it's there.
oh its an 03........ i've heard its different for teh 02 than on an 03-05..... where would it be on an 03?
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
could of swore there all the same. factory wise it plugged into the intake tube towards the bottom side. if you have no factory intake you can use one of the vacum ports on the intake manifold to the drivers side of the throttle body. you will have to remove a plug that covers it. just plug it in and your good.
