will a intake from a 98 2.2 cavalier fit my 96 2.2 cavalier


I live my life a quarter pounder at a time. And For that 11 sec or less it takes me to devour one I am free.

Should work if they are the same engines. Such as 2200 to 2200 motor. Otherwise you might have to do some modifying. But if they are both 2.2's they will fit.








http://www.j-body.org/forums/read.php?f=1&i=333805&t=333704#333805

the 2200 intake is a bit longer due to the tb being behind the engine, so you might have to cut a few inchs off.

alrite this all depends on the intake. your 96 has the 2.2l where as the 98 has the 2200. the only difference that involves the intake is that on the 2.2l the throttlebody is mounted on the top of the engine pointing forward where as on the 2200 the throttlebody is mounted behind the engine pointing upwards. now depending on the intake there may or may not need any modifying. first check to see if the intake in question goes all the way to the throttle body. if it doesn't it may not work (may be too short). if it is made to go to the throttle body then one of two things will happen. if it's like my weapon r intake the 90 degree bend to go down to the throttle body is a seperate piece. just take it off and you're done. if it's all one piece, you will need to cut the intake down to fit.




5 YEAR ANNIVERSARY FREEBIE GIVEAWAY - CLICK HERE TO ENTER
What you know about Street Racing anyways? Only what Fast & Furious taught us....
SO EVERYTHING!

this is the one http://www.sfxperformance.com/catalog/product.asp?ProductCode=VIB2230 it looks like i might have to cut a little what should i use to cut it


I live my life a quarter pounder at a time. And For that 11 sec or less it takes me to devour one I am free.