Im getting ready to finish up my suspension. one of the things i need or want is the addco front rear swaybar set from gravana.. it says it comes with all the poly mid and end link bushings. now i dont have a front sway bar as is. does this have everything to put on or do i have to buy other things to make the front fit on? thanks.
It has everything that you will need.
It doesn't come with the brackets that cover the D bushings on the front bar. You need to order those from the dealer.
Cracker Rocket wrote:It has everything that you will need.
NO!!! As Zach already stated, you will need the brackets and the bracket bolts. You can get them from a dealer or a yard; we recommend the dealer.
C.T.S.- it was my understanding that the bolts were there. I'll take a look at my GF's car this weekend to confirm(she has no front bar).
I just looked at my sister's base cavalier, I didn't see any bolts. But I'm not ripping her suspension appart at midnight to be sure.
lol easy guys ! ok if i order this combo, how much will it be from the dealer roundabouts? and on a 1-10 1 being easiest 10 hardest how hard is this to do by myself? i have air tools. i will probably do this and control arm bushings at once to finish up suspension so i can move on to finish the motor or trans. thanks for the help so far, keep it coming and no black eyes please! lol
Carbon Cavi wrote:lol easy guys ! ok if i order this combo, how much will it be from the dealer roundabouts? and on a 1-10 1 being easiest 10 hardest how hard is this to do by myself? i have air tools. i will probably do this and control arm bushings at once to finish up suspension so i can move on to finish the motor or trans. thanks for the help so far, keep it coming and no black eyes please! lol
LOL all i have left is the front bar to due and you need to order the clamps if you didnt have a front sway to begin with. As far as the bolts i dont know.
price for those parts and install difficulty?
Here are the part numbers you need:
22660396: Front Stabilizer Bar Bracket-you will need two of these
22619843: Front stabilizer bar bushing- you will need two of these also
The overall cost is $26.68 from www.gmpartsdirect.com......good luck.
And as far as the front install goes, the hardest part is dropping the subframe.
thanks alot, i like it when the org works out, makes up for all the other bickering and useless crap.
Cracker Rocket wrote:Here are the part numbers you need:
22660396: Front Stabilizer Bar Bracket-you will need two of these
22619843: Front stabilizer bar bushing- you will need two of these also
The overall cost is $26.68 from www.gmpartsdirect.com......good luck.
Does the ADDCO bar not come with the bushings?
Just got an addco front and it came with the D bushings. But if you don't already have a front bar you need the clamps. As far as the bolts, there is already one there holding a power steering line on. should need there other one or two on the other side.
Go Go OG Traction!!
Yeah. The Addco comes with bushings. You'll need the brackets (2) and 1 bolt (other is holding PS line as Nick said).
tru dat!