So Adam's Rotors is willing to make a direct fit rotor for the Club Jeffie Saturn rear disc swap. Ryan (Slowzee) has been on the prowl for a direct fit rotor option since the beginning, and Adams Rotors is willing to step up to the plate for us.

Now here's the catch. He needs to see the interest before going forward with them, and pricing will be determined by interest.

Please do not post you're interested if you have no intention of buying or don't have the money to do so.

They will be available in any of their 12 patterns offered. Rotor styles can be found here.

An exerpt from the website.

Quote:

quality, it's all in the details...

we chamfer each drill hole and pay extreme attention to how we lay down our machining�taking meticulous measures to avoid each and every vent ribs, the internal cooling veins in these massive rotors. AR will not drill a rotor we are unable to do so with, and thus unlike most, never have issues. this is another reason why unlike many, we also offer dimples and unique slot patterns, ways of avoiding this and offering better, longer lasting, quality products when we see possible issues with venting. lastly each set is made for YOU without limitations to options/styles/finishes pre-made and �in stock� laying on the shelf. instead, we start each order upon payment & cater to your needs/wants for your car.
so...you tell us how you want them, with over 12+ options!!!

-dimpled
-drilled
-slotted
-dimpled/slotted
-drilled/slotted
-new AR: drill/drill/slot
-new AR: dimple/dimple/slot
-AR exclusive: sport I�s an over-dimple (must be ordered w/coated hubs)
-AR exclusive: sport II�s an over-slot (must be ordered w/coated hubs)
-AR exclusive: race our unique double slot (must be ordered w/coated hubs)
-AR exclusive: street double slot/drill (must be ordered w/coated hubs)
-AR exclusive: track double slot/dimple (must be ordered w/coated hubs)
-custom pattern match (C-hook, J-hook, Type-3, etc.)

again, each set includes a complimentary rust free zinc finish with order...a corrosion protection process/measure...

BUT:
*COLORED ZINC FINISH: add $25

gold zinc or black zinc finishes are a subtle, unique, aesthetic touch for your rotors very few offer, while still protecting your rotors from the elements.

also...
*COATED HUBS: add $50:

black (or any of our colors) hubs gives the looks of a 2-piece rotor and is a clean, polished, finished look. the rotor is still standard silver zinc dipped, but with an added baked on matte ceramic-silica coated hub/hat. this is required with the selection of one of our exclusive patterns.

ONE (1) YEAR EXCHANGE WARRANTY!

Now that is just directly off their website. With enough interest Zinc finish and coated hubs could be free of charge.

Matching fronts may be available also depending on demand.

The more people willing to commit to this the better. Please do not post you're interested if you have no intention of buying or don't have the money to do so.


Now lets get this rolling.

1. JuggaloGodfather
2. Vincent Morris
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.







Edited 2 time(s). Last edited Monday, November 07, 2011 1:07 PM

Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.

How about a full set for front and back?

Which version is the cheapest, and which version is the lightest?




Edited 1 time(s). Last edited Monday, November 07, 2011 7:00 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

The price will be the same regardless of pattern picked.

Also front and rears are a possibility.


Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.

im in for a set of drilled/slotted with a zinc coating
1. JuggaloGodfather drilled/slotted with zinc coating

1. JuggaloGodfather drilled/slotted with zinc coating
2. Vincent Morris, which ever rotor it takes to match wilwood fronts.

holy @!#$ hell yes im so in. that re-drilling the 4X100 crap is beyond gay.

im with vince...

1.) JuggaloGodfather drilled/slotted with zinc coating
2.) Vincent Morris, which ever rotor it takes to match wilwood fronts.
3.) Brad Wheeler, which ever rotor it takes to match wilwood fronts.



Edited 1 time(s). Last edited Monday, November 07, 2011 1:59 PM


Come join us over on the Olds Quad 4 and Twin Cam Facebook group!