Im in need a pics of where and how you mounted stop block so when you air out the car the body kit wont hit. I know a few have done it i need pics.
thanx
Jon
dont mind the trans pan and how dirty it is. it has a new trans pan now and is kinda cleaner
IDK if this counts, but heres my exhaust laying....
Of course, Yellow and I have our's on for different reasons that what you're wanting.
We drag ours, so instead of draggin threw the tranny pan (AHEM!) We have blocks.
...
brighten up the Stenger's pic , am I seeing 2 drag blocks on there on each side? Does your car float or anything like that when its dragging?
Not that I've noticed.
I think with them being put in the same location on both sides, and the specs being the same on them, they don't 'cause much of a air disturbance under the car.
I've clipped road with them a few times, but thats just from driving a little to low. (40psi front) Typically I ride 45-52 psi front, 40-45 rear. If I am unsure on the road (or know its problems) I'll ride 60-75psi front 45psi back.
And I found out, dragging when roads are wet, is about the only time it floats. Go threw a big puddle and it kinda hydroplanes a bit. But just wet ground it glides so smooth, and still throws sparks.
...
yeah my car dont float with 2 on there either i have 2 on mine you just cant really tell in that pic
