Ok guys im HOPING no one has takled about this but I haev one fo the two right now and im getting the second very shortly. I want to know who hard it was to get the control arms out. If any special tool was needed. Also i know that the bushings when getting pressed in, i need to use ALL the grease that comes along with it.
Anything else i need to know about before i start to tackle this job?
Thanks for any help!
search for How to, I have a full write up wth pics on how to remove t control arms
oh yeah another thing to add, if your pressing the bushings in yourself one thing to watch out for.... there is a top and bottom on the big bushings, make sure you install them the right way and also when you press in the big bushings... seems liek common sence but make sure your pressing them in from the rounded side of the control arm not the sharp edge... if you press it in from the sharp edge your cut right through the bushing.
I also have a press to help... i dont charge much
