Hey guys,
well, i took out my reds and installed the koni yellows in the rear. BUT the koni yellow shock rod is bigger then the rear upper strut mount hole(bushing). So i have to drill it out with a 15/32( i believe) drill bit. Now, these are still my stock 95 rear mounts, but i was wondering if others had to do this with the konis yellows, or are the newer year rear strut mounts have a bigger shock rod hole.

So have others had to drill out their rear mount to have the shock thread fit thru, and if not, what year is ur cavy/sunfire so i can get that year of mounts.



Nate



Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft

You have to drill it out... I think that's part of the instructions. I know Pat did.

mm. they didnt say that in my instructions. If i had known i would have bought new rear mounts. Cause now i do. His was a 99 tho wasnt it?

Still doesnt answer ther 2k+ question with yellows...although i'm pretty sure i know what the answer will be.

Nate



Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft

Yeah, you have to drill them no matter what year they are. Nature of the beast.

mm.. bur are the 2ks different then the per 2ks. anybody got pics?

Nate



Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft

I don't think so. I think the rear mounts are all the same, but I'm not positive on that.

Rears are the same 95-05. Front changed design, but not fitment (rod hole is the same size all years).

the years are all the same. you have to drill out to 1/2". Adam has my drill bit.