got an 03 cav and just wondering, if i get a set of AGX, is there any modifications needed? or can you do it yourself and have it alligned by a professional?


knock if you buck

No mods needed. Just bolt them in, and get it aligned. Worst part of installing, is removing and installing the springs. For that you'll need a spring compressor.

Extream 4door wrote:No mods needed. Just bolt them in, and get it aligned. Worst part of installing, is removing and installing the springs. For that you'll need a spring compressor.

Yep what he said ... basically AGX are ready to go there is no cutting or anything, easy to do yourself as long as you have some air tools and a spring compressor and your good to go.

I also took the liberty too add some previous topics here incase you haven't search yet. Alot of good and useful information are there.

http://www.j-body.org/forums/read.php?f=3&i=100851&t=100851

http://www.j-body.org/forums/read.php?f=3&i=100590&t=100590

http://www.j-body.org/forums/read.php?f=3&i=100883&t=100883

http://www.j-body.org/forums/read.php?f=3&i=100537&t=100537

http://www.j-body.org/forums/read.php?f=3&i=100152&t=100152



Visit all new Team JDF Website - Team JDF Promoter

thanxs guys


knock if you buck

don't forget to ask for the washers(spacers) from KYB..... cause you need those for the front

Da Ghost (Qc) wrote:don't forget to ask for the washers(spacers) from KYB..... cause you need those for the front

Oooohhh Snap I completely forgot because I also needed them to send me replacement washers since it wasn't included with my AGX when I purchase them. And I also needed a replacement on one of my Nut but they sent me 2 either way which was nice of them. So def big thumbs up for customer service. Make sure you tell them what year and model of course.



Visit all new Team JDF Website - Team JDF Promoter

Opps. Yeah, most new ones will have the washers, but if they don't have the washers included, then contact KYB for some.