I ordered my coil springs today
im getting 4 hotrod shocks modded to fit the cavy with the strut parts if it works (pretty much like koni)they are 1/2 inch shorter than the stock struts
if it doest work im getting tokico or koni this summer
I received my neon rear disc brake backing plates
and ive got a couple other goodies on my to orderlist like urethane bushings and rear sway bar along with a bonneville brake master cylinder! suspension work this year
and i am slotting the strut tower to have and adjustable camber!
sunstealth wrote:I ordered my coil springs today
im getting 4 hotrod shocks modded to fit the cavy with the strut parts if it works (pretty much like koni)they are 1/2 inch shorter than the stock struts
if it doest work im getting tokico or koni this summer
I received my neon rear disc brake backing plates
and ive got a couple other goodies on my to orderlist like urethane bushings and rear sway bar along with a bonneville brake master cylinder! suspension work this year
and i am slotting the strut tower to have and adjustable camber!
for what its worth if your getting shocks modified it may be cheaper to just buy a pre-assembled coil-over system.
If i'm not mistaken the Tein SS setup already has camber adjustability.
-Chris
my uncle just bought equipment to run a macine shop,hes a 30 years old experienced welder (in fact he made the nhl goal for 14 years) and he helped with the welding of some pieces on i dont know which satellite !
it will cost me like 100$ to get them modified
^Luck bastard.........
I would not reccomend slotting the strut tower however, but to each their own.
if he has a machine shop it would be better to just make the proper camber plates.
-Chris
