for starts, i have a 91 2.0 n/a TBI sunbird, im attempting to do a 2.0 turbo conversion using a T3 from a dodge.

so far these are the parts i will be using

T3 watercooled turbo
2.0 turbo forged pistons
2.0 turbo intake manifold
1.8 fuel rail
fiero TB
turbo exhaust manifold
custom down pipe, 2.5 exhaust
2.25 charge pipes
dodge srt-4 intercooler
RRFPR
MBC & boost gauge
air/fuel gauge

since this is my 1st build, for now im only trying to run with around 6-7 psi, until i get more familiar with tuning..etc

i havent decided on injectors or the fuel pump yet or what im going to tune with

i also heard i have to convert from DIS to dizzy, which i read about...but wasnt really in depth...so i dont know quite what to do with that

im having a hard time getting the ecm and wiring for the 2.0 turbo(dealer doesnt carry them), do i really need them?

BASICALLY, im looking for advice on installation, tuning, what im going to do with wiring/ecm, converting from DIS to dizzy, wiring for the extra injectors for the 2.0 intake, oil and coolant lines for the turbo...probably more which i cant remember right now

please dont put down my project, just need advice

feel free to contact me on AIM: soanxiousnsweet or yahoo: j105854