I went to get my car aligned, again for the 3tdr time in 3 years.

Now this place suddenly decided I needed to pay 30$ more because I have a drop kit , suspension technique 1.2 front .9 rears, and they will not warranty it ether, anyway, after they got it done, there still some issues

When I fully turn right and come back , the car pull right, when I fully turn left and come back it pull?s left , any idea on what this could be?

Anyone experience these issues before.

Btw: everything is stock except for the coils
New struts regular size because the drop is so light I did not feel the need to change them with specific drop strut
New moog ball joints
Coils are suspension techniques front 1.2 rear .9
These were all done in May 2005 at 93000kms car now has 107000kms

Last week I replace the strut bearing has they were noisy

Tie rods have no play; all bushings are in good shape. No loose found, shop cannot explain why this condition is present.

I called one of the best alignment shop around the area ,and he tells me he will not touch my alignment because it?s drop only on coil , he feel I needs some special control arm or drop down spindle?s

Please help me, what due I need to due to get my car rolling properly. I don?t really care putting a other 1200$ in my front end if the car rides ok after and stops wearing my tire every 10000kms

Which parts due I needs where can I get them how mush I?m I looking at. Please help

i would highly suggest checking your strut mounts, but other than that i'd find a new shop. also there are no drop control arms or spindles for a jbody i wish there was!


watch for flying sparks!!!