Well, I have been thinking about adding an MSD DIS 2 unit to my 94 sunbird for better ignition control. I have a question though. The factory coil is a large, one piece unit that is bolted to the underside of the intake manifold. It has one connector and the 4 spark plug wire outputs. If I were to buy the MSD DIS 2 and hook it up, would I hook it up to that ignition coil/module, or would I end up having to get a different style coil? MSD also sells those DIS interface modules that the coil goes into. Will this work or do I need something else? Thanks, Paul Moore



Trying to become the most modded out N/A 2nd gen sunbird 4 cylinder on the org with a..... screw that, I'm going turbo!!!

2.Slow OHC I4
Ported cylinder head, intake and exhaust
Relocated IAT with a custom WAI with a 6x9 K&N conical filter
All this, and I still can't go fast.............yet!!

DIS = distributorless ignition system.
If the regular OHC engine uses the same ignition system as my turbo OHC, then you need something like the 6al that is actually made for a distributer set-up.



Cardomain|Myspace